User`s guide

Setting Passwords

There are two ways to set a power-on password:

Using the SETUP program

Using the EISA System Utilities.

To set a power-on password in SETUP, follow the instructions

in Chapter 2 for starting and running the program. Select the

Password option on the second page of SETUP options and

follow the instructions on the screen to set a password.

You must run the EISA System Utilities to set a network and

keyboard password, but you can also use it to set a power-on

password.

Follow these steps to set your password (s):

To start the EISA Configuration utility, insert the System

Configuration diskette in drive A.

Log onto drive A and type SD. Press Enter at the next two

screens to bring up the Main Menu.

3. Select Access System Utilities.

Then select Password Utility. You see the following:

Password Utility Menu

Set Initial Power-on Password

Activate/Deactivate Network Password

Set Keyboard Password

Lock Keyboard

Return to Utilities Menu

Now follow the steps in the appropriate section(s) below.

4-10 Using your Computer