User`s guide

CF command parameters (continued)
Parameter
/M
Mode
Monochrome
display mode
Function
Displays the program in black and
white only. In default mode, color
monitors will display in color. Run
the program in this mode if you
have redirected the console
output to a serial port.
/N Non-target Allows you to run the EISA
modeling mode Configuration utility in non-target
modeling mode; see page 3-31 for
more information.
Suppress reboot Exits the program without rebooting
mode the computer.
Copying the Configuration Files to a Hard Disk
To run the EISA Configuration utility from your hard disk, you
must be running MS-DOS from that disk.
To copy all the configuration files from the System
Configuration diskette to the hard disk, insert the diskette in
drive A, type the following command, and press Enter:
COPY A:*.* [d:l[pathl
where d: and path are the drive and directory to which you
want to copy the files.
3-36 Running the EISA Configuration Utility