User`s guide

2. Then type the following and press Enter to start the
program :
CF [parameters]
The table below describes the parameters you can use to
modify the way the utility runs on your computer.
CF command parameters
Parameter Mode
Function
IA Advanced
mode
Enables four advanced options for
the system on the View or edit
detailsscreen; see page 3-28 for
more information.
/B BIOS video
output mode
Displays the program using
BIOS int 10h calls for systems with
non-standard displays or that are
redirecting the console output to a
serial port. In default mode, the
program writes directly to the video
memory.
ID
IF
Dispatcher
Causes the program to be
spawning mode
spawned by the dispatcher.
Fad
Determines the boards and options
configuration
installed and configures your
operation
system automatically using the
information in the CMOSRAM; if it is
invalid, the program uses the
information in the SYSTEM.SCI file.
/H High resolution
Displays 43 lines per screen on an
display mode
EGA monitorand 50 lines per
Screen on a VGA monitor. In
default mode, the Screen displays
25 lines.
/K Keyboard only
Sets the program so a mouse
mode
cannot be used, even if you have
installed one. In default mode, you
can use a mouse as long as a
mouse driver is loaded.
Running the EISA Configuration Utility
3-35