User`s guide

Note

If you installed EISA option cards in your system, the

program first asks you to insert a diskette containing

a CFG file for the EISA card. Remove the System

Configuration diskette, insert the appropriate

configuration diskette, and press Enter. Follow the

instructions on the screen to complete the installation

and then go to the next step.

Select Step 1 and read the information displayed on your

screen about configuring your system. If you want to print

any of the screens to the printer connected to port LPT1,

press the Print Screen key.

Select Step 2 and follow the instructions on the screen to

add, remove, or move option cards in your configuration

and copy any necessary CFG files to your System

Configuration diskette. See the next section for more

information.

Select Step 3 and follow the instructions on the screen to

view or edit the details of your system board and your

option cards. See “Defining the Configuration Settings”

below for more information.

Select Step 4 if you want to view or print the current

configuration and any switch or jumper settings you may

need to change. Follow the instructions on the screen.

When you finish configuring your system, select Step 5

to save the configuration in your computer’s CMOS RAM

and reboot the system. You can also exit the program

without saving the configuration, if necessary. Follow the

instructions on the screen.

3-10 Running the EISA Configuration Utility