User`s guide

SETUP program options (continued)
Option
LCD
Settings
Enabled*
Disabled
Description
Set thisoption to Disabled; your
system does not have an LCD
screen
Onboard Enabled*
Mouse Disabled
Set to Enabled if you have
connected a mouse to the
built-in mouse port; set to
Disabled if you are not using a
mouse (freeshardware interrupt
IRQ12) or if you are using a
mouse controller installed on an
option card
Parallel Port Address 378H:
Select one of the Compatible
Compatible / IRQ7*
optionsto set the port for IBM AT
Address 278H:
compatible signals select one of
Compatible / IRQ7
the Bidirectional optionsto set
Address 378H:
the port for IBM PS/2 compatible
Bidirectional / IRQ7
bidirectional signals; address
Address 278H:
378H is for LPT1 and 278H is for
Bidirectional / IRQ7
LPT2; select Disabled to prevent
Disabled
the port from reacting to any
signaIs (no resourcesare
allocated when Disabled)
Serial Port 1 (6) Address 3F8H/IRQ4*
Select the addressyou want to
Address 2F8H/IRQ3
use for serial port 1; address 3F8H
Address 3E8H/IRQ10 is for COM1, 2F8H is for COM2,
Disabled
and 3E8H is for COM3; set to
Disabled to prevent the port
from reacting to any signaIs (no
resourcesare allocated when
Disabled)
Serial Port 2 (6) Address 2F8H/IRQ3*
Select the addressyou want to
Address 3E8H/IRQ10
use for serial port 2; address 2F8H
Address 2E8H/IRQ11
is for COM2, 3E8H is for COM3,
Disabled
and 2E8H is for COM4; set to
Disabled to prevent the port
from reacting to any signals (no
resourcesare allocated when
Disabled)
2-10 Running the SETUP Program