User`s guide

SETUP program options (continued)
Option Settings
Date dd month yyyy
Description
Set the current day (dd), month,
and year (yyyy); automatically
tracksleap years
Onboard
Floppy
Enabled*
Disabled
Set to Enabled to use the built-in
diskette drive controller; set to
Disabled to disable the built-in
controller if you are eithernot
using a diskette drive or will use a
controlleron an option card
Diskette A
Diskette B
5.25”, 360 KB
5.25”, 1.2 MB
3.5”, 720 KB
3.5”, 1.44 MB (A*)
3.5”, 2.88 MB
Not Installed (B*)
Set to the type(s) of diskette
drive(s) installed in the system; set
to Not Installed if you do not
have the specified drive installed
Onboard IDE Enabled Set to Enabled to use the built-in
Disabled* IDE hard disk drive controllerto
control your IDE drive(s); set to
Disabled to use the IDE interrupt
(IRQ14) for an option card or if
you install an external IDE drive
controller (1)
Hard Drive 1
Hard Drive 2
Type nn
Not Installed*
Set to the hard disk drive type of
the specified IDE hard disk drive
or enter parameters for
user-definable drive type
according to the drive’s
documentation; select the
user-defined drive type number
you want to use in User Definable
Drivesoption, described below;
select Not Installed for both
options if you have installed a
SCSI hard disk drive. (For more
information, see “Hard Disk Drive
Types” on page 2-13.)
Running the SETUP Program 2-5