User`s guide

7. Turn on your computer. When you see the prompt, press F1
to run SETUP. Follow the instructions in Chapter 2 to set a
new power-on password using the SETUP program.
8. Insert the System Configuration diskette in drive A and turn
on the computer. Follow the instructions in Chapter 4 to set
a new power-on password using the EISA System Utilities.
If you need to activate your new power-on password as a
network password, see Chapter 4 for information about using
the EISA System Utilities to activate a network password.
becomes your keyboard password. If you want to set a
Keyboard Problems
If the keyboard is not working correctly, see the suggestions
below.
0 Make sure the keyboard is securely connected to its port.
0 Make sure your keyboard is not locked. Check the
keyboard/ mouse lock indicator to see if it is locked. If so,
press the keyboard/ mouse lock button to unlock it. See
Chapter 4 for instructions.
0 If you are still having problems, see “Power or Lock-up
Problems” above.
Troubleshooting A-21