User`s guide

If you are running a software program, try these procedures:
If your computer is processing a complicated command or
performing a complex task, it may take a long time to
complete its work. If the computer does not respond after a
reasonable length of time, proceed to the next step.
Press Num Lock. If the Num Lock indicator light on the
keyboard lights up, the computer is probably still
processing a command. If it does not light up, proceed to
the next step.
Press Ctrl Alt Del or press the reset button to exit the
software program and reboot the computer.
If resetting the computer does not work, turn it off and wait
at least five seconds. If you do not have a hard disk drive,
insert a bootable diskette in drive A. Then turn on the
computer and try running the program again.
If none of these procedures work, check your software
documentation or contact your software manufacturer for
technical support.
Password Problems
If you set a power-on, network, or keyboard password and you
have trouble entering it, check the section below that describes
the problem you are having.
You enter the password, but nothing happens
Type the password again and press Enter. You have three
chances to enter a power-on or network password correctly
before the system locks up. If this happens, press the reset
button to reboot the computer and try again. You can try as
many times as necessary to enter a keyboard password.
Troubleshooting A-19