User`s guide

Setting Main System Board Jumpers
The jumpers on your main system board allow you to control
the following computer operations:
0 Recover the system BIOS if it becomes corrupted
0 Enable or disable the built-in video controller
0 Write-protect the diskette drive(s)
0 Set the factory defaults for non-volatile RAM (NVRAM)
0 Enable or disable the password function
0 Set the SIMM sockets to accept standard or high capacity
SIMMs
0 Write-protect the configuration information in the FLASH
memory
0 Alter the starting video controller base address
0 Set the video memory size
If you need to change any jumper settings, follow the
instructions in this section.
6-18 Installing and Removing Options