Technical data

4-6
Hardkey and Softkey Reference
are listed below.
2.4mm 85056
2.92 85056K
2.92mm other kits
3.5mm C 85033C
3.5mm E 85033D/E
3.5mm D 85052D
7-16 85038
7mm 85050
N 50
Ω 85032 F
N 50
Ω 85054
N 75
Ω 85036
TRL 3.5 mm 85052C
CAL ZO: LINE ZO. this default selection establishes the TRL/LRM LINE/MATCH standard as the characteristic
impedance.
CAL ZO: SYSTEM ZO. allows you to modify the characteristic impedance of the system for TRL/LRM calibration.
CALIBRATE MENU. leads to the calibration menu, which provides several accuracy enhancement procedures ranging
from a simple frequency response calibration to a full two-port calibration. At the completion of a calibration
procedure, this menu is returned to the screen, correction is automatically turned on, and the notation Cor or C2 is
displayed at the left of the screen.
Center. is used, along with the Span key, to define the frequency range of the stimulus. When the Center key is
pressed, its function becomes the active function. The value is displayed in the active entry area, and can be changed
with the knob, step keys, or numeric keypad.
CENTER. sets the center frequency of a subsweep in a list frequency sweep.
CH1 DATA [ ]. brings up the printer color selection menu. The channel 1 data trace default color is magenta for color
prints.
CH1 DATA LIMIT LN. selects channel 1 data trace and limit line for display color modification.
CH1 MEM. selects channel 1 memory trace for display color modification.
CH1 MEM [ ]. brings up the printer color selection menu. The channel 1 memory trace default color is green for color
prints.
CH2 DATA [ ]. brings up the printer color selection menu. The channel 2 data trace default color is blue for color prints.
CH2 DATA LIMIT LN. selects channel 2 data trace and limit line for display color modification.
CH2 MEM. selects channel 2 memory trace for display color modification.
CH2 MEM [ ]. brings up the printer color selection menu. The channel 2 memory trace default color is red for color
prints.
CH3 DATA [ ]. brings up the printer color selection menu. The channel 3 data trace default color is magenta for color
prints.
CH3 DATA LIMIT LN. selects channel 3 data trace and limit line for display color modification.
CH3 MEM. selects channel 3 memory trace for display color.
CH3 MEM [ ]. brings up the printer color selection menu. The channel 2 data trace default color is green for color prints.
CH4 DATA [ ]. brings up the printer color selection menu. The channel 4 data trace default color is blue for color prints.
CH4 DATA LIMIT LN. selects channel 4 data trace and limit line for display color modification.
CH4 MEM. selects channel 4 memory trace for display color modification.
CH4 MEM [ ]. brings up the printer color selection menu. The channel 2 memory trace default color is red for color
prints.
Chan 1 . allows you to select channel 1 as the active channel. The active channel is indicated by an amber LED
adjacent to the corresponding channel key. All of the channel-specific functions you select, such as format or scale,
apply to the active channel. By default, Chan 1 measures S11 in log mag format.