Technical data

2-4

Front/Rear Panel

Analyzer Display

Figure 2-2. Analyzer Display (Single Channel, Cartesian Format)

The analyzer display shows various measurement information:

• The grid where the analyzer plots the measurement data.

• The currently selected measurement parameters.

• The measurement data traces.

Figure 2-2 illustrates the locations of the different information labels described below. In addition to the

full-screen display shown in the illustration above, multi-graticule and multi-channel displays are available,

as described in the “Making Measurements” chapter of the user’s guide. Several display formats are

available for different measurements, as described under Format, in Chapter 4, “Hardkey and Softkey

Reference”

1. Stimulus Start Value. This value could be any one of the following:

• The start frequency of the source in frequency domain measurements.

• The start time in CW mode (0 seconds) measurements.

• The lower power value in power sweep.

When the stimulus is in center/span mode, the center stimulus value is shown in this space. The color of

the stimulus display reflects the current active channel.