Technical data

1-16
Specifications and Regulatory Information
Laser Safety Considerations
Laser Warning Labels
The 8703B is shipped with the following warning labels. For systems used outside of the USA, both laser
aperture and laser warning labels will be included with the shipment (The labels are located in the same
box as this manual). Place these labels directly over the USA laser warning and aperture labels.
Figure 1-7. Laser safety label locations
CAUTION Exposure to temperatures above 55°C may cause the front panel fiber to retract. In this case a matching
compound can be used to temporarily improve return loss. However, the system should be returned to Agilent
Technologies for repair.
CAUTION This product is designed for use in INSTALLATION CATEGORY II and POLLUTION DEGREE 2, per IEC 1010 and
664 respectively.