Technical data

Notices
© Agilent Technologies, Inc.
July 2004
No part of this manual may be
reproduced in any form or by
any means (including elec-
tronic storage and retrieval or
translation into a foreign lan-
guage) without prior agree-
ment and written consent from
Agilent Technologies, Inc. as
governed by United States and
international copyright lays.
Manual Part Number
08703-90059
Edition
First edition, July 2004
Printed in Malaysia
Agilent Technologies, Inc.
Digital Signal Analysis
1400 Fountaingrove Parkway
Santa Rosa, CA 95403, USA
Warranty
The material contained in this
document is provided “as is,”
and is subject to being
changed, without notice, in
future editions. Further, to the
maximum extent permitted by
applicable law, Agilent dis-
claims all warranties, either
express or implied, with regard
to this manual and any infor-
mation contained herein,
including but not limited to the
implied warranties of mer-
chantability and fitness for a
particular purpose. Agilent
shall not be liable for errors or
for incidental or consequential
damages in connection with
the furnishing, use, or perfor-
mance of this document or of
any information contained
herein. Should Agilent and the
user have a separate written
agreement with warranty
terms covering the material in
this document that conflict
with these terms, the warranty
terms in the separate agree-
ment shall control.
Safety Notices
CAUTION
Caution denotes a hazard. It calls
attention to a procedure
which, if not correctly per-
formed or adhered to, could
result in damage to or destruc-
tion of the product. Do not
proceed beyond a caution sign
until the indicated conditions
are fully understood and met.
WARNING
Warning denotes a hazard. It
calls attention to a procedure
which, if not correctly per-
formed or adhered to, could
result in injury or loss of life.
Do not proceed beyond a
warning sign until the indi-
cated conditions are fully
understood and met.
Restricted Rights Legend.
Use, duplication, or disclosure
by the U.S. Government is sub-
ject to restrictions as set forth
in subparagraph (c) (1) (ii) of
the Rights in Technical Data
and Computer Software clause
at DFARS 252.227-7013 for
DOD agencies, and subpara-
graphs (c) (1) and (c) (2) of
the Commercial Computer
Software Restricted Rights
clause at FAR 52.227-19 for
other agencies.
2