Technical data

1-12
Specifications and Regulatory Information
Specifications and Characteristics
Table 1-2. General Information
General Information
Description Specification Characteristic
Rear Panel
Test Port Bias Input
Maximum voltage
±40 Vdc
Maximum current
±500 mA
External Reference In
Input Frequency 1, 2, 5, and 10 MHz
±200 Hz at 10 MHz
Input Power
−10 dBm to +20 dBm
Input Impedance 50
Ω
VGA Video Output 15-pin mini D-Sub; female. Drives VGA
compatible monitors.
GPIB Type-57, 24-pin; Microribbon female
Parallel Port 25-pin D-Sub (DB-25); female; may be used
as printer port or general purpose I.O. port
RS232 9-pin D-Sub (DB-9); male
Mini-DIN Keyboard/Barcode Reader 6-pin mini DIN (PS/2); female
Line Power A third-wire ground is required.
Frequency for Microwave Test Set
Frequency for Lightwave Test Set
47 Hz to 63 Hz
50 Hz to 60 Hz
Voltage at 115 V setting 90 V to 132 V 115 V
Voltage at 230 V setting 198 V to 265 V 230 V
VA Maximum for Microwave Test Set
VA Maximum for Lightwave Test Set
450 VA max
70W max
Front Panel
RF Connector 3.5-mm precision (male)