Technical data

8-4
Preset State and Memory Allocation
Preset State
Edit Mode Start/Stop, Number of Points
Response Conditions
Parameter Channel 1: Trans: O/O
Channel 2: Trans: O/O
Channel 3: Trans: E/O
Channel 4: Trans: O/E (Port 1)
Conversion Off
Format Log Magnitude (all inputs)
Display Data
Color Selections
Same as before Preset
Dual Channel Off
Active Channel Channel 1
Auxiliary Channel Off
Frequency Blank Disabled
Retrace Power Standard
Test Set Switch Hold
Split Display 2X
Intensity
If set to <15%, Preset increases intensity to 15%. Otherwise, Preset has no
effect.
Beeper: Done On
Beeper: Warning Off
D2/D1 to D2 Off
Title Channel 1 = Empty
Channel 2 = Empty
IF Bandwidth 3000 Hz
IF Averagine On/Off Off
IF Averaging Factor 16
Smoothing Aperture On/Off Off
Smoothing Aperture Setting 1% SPAN
Phase Offset 0 Degrees
Electrical Delay 0 ns
Table 8-1. Preset Conditions (2 of 7)
Preset Conditions Preset Value