Technical data

1-10
Specifications and Regulatory Information
Specifications and Characteristics
Electrical-to-Optical Measurement Dynamic Range Characteristics
Electrical-to-Optical Measurement Responsivity Measurement Range
Electrical-to-Optical Measurement Dynamic Range
a
a. Pertains to a 10 Hz IF bandwidth.
Description Frequency Range Characteristic
System Dynamic Range 0.05 to 20.05 GHz 80 dB
The following table shows the maximum and minimum values of the E/O device under test (DUT)
frequency response, measured with microwave power applied from microwave port 1. The dynamic range
stays constant irrespective of the microwave port power. That is, the maximum and the minimum dB W/A
that can be measured increase with reduced microwave port power.
Electrical-to-Optical Measurement Responsivity Measurement Range
a
a. Pertains to a 10 Hz IF bandwidth.
Power at Port 1
(dBm)
Maximum Value
(dB W/A) Characterisitc
Minimum Value
(dB W/A) Characterisitc
Dynamic Range
(dB) Characterisitc
5 –30 –110 80
–65 40 –40 80
-120
-100
-80
-60
-40
-20
0
20
40
-70 -60 -50 -40 -30 -20 -10 0 10
Microwave Port Power (dBm)
E/O Responsivity (dB W/A)q
Maximum Value
Minimum Value