Technical data

7-3
Options and Accessories
Accessories Available
• 11886A, HMS-10 cable, 9/125 um
Microwave Test-Port Cables: 3.5mm
• 85131C single, semi-rigid: 3.5-mm to 3.5-mm, 81-cm (32-in).
• 85131D set, semi-rigid: 3.5-mm to 3.5-mm, 53-cm (21-in) each.
• 85131E single, flexible: 3.5-mm to 3.5-mm, 96-cm (38-in).
• 85131F set, flexible: 3.5-mm to 3.5-mm, 53-cm (21-in) each.
• 85132C single, semi-rigid: 7-mm to 3.5-mm, 81-cm (32-in).
Microwave Test-Port Cables: 7mm
• 85132D set, semi-rigid: 7-mm to 3.5-mm, 53-cm (21-in) each.
• 85132E single, flexible: 7-mm to 3.5-mm, 96-cm (38-in).
• 85132F set, flexible: 7-mm to 3.5-mm, 53-cm (21-in) each.
Calibration Kits
Choose a kit for each connector type to be used.
• 85052B 3.5-mm standard calibration kit (0.045 to 26.5 GHz)
Contains fixed loads, sliding loads, open and short circuits, and adapters for both connector sexes for
use with 3.5-mm test-port cables. Option K11 PSC-3.5 slotless female center contact repair kit.
• 85052C 3.5-mm LTRA calibration kit (0.045 to 26.5 GHz)
Contains fixed loads, open and short circuits, TRL lines, and adapters for both connector sexes for use
with 3.5-mm test-port cables.
• 85052D 3.5-mm economy calibration kit (0.045 to 26.5 GHz)
Contains fixed loads, open and short circuits, and adapters for both connector sexes for use with
3.5-mm test-port cables.
• 85032F 50
Ω type-N calibration kit (30 kHz to 9 GHz)
Contains a female and male open and short, female and male load standard, and a torque wrench.
• 85033D 3.5-mm RF calibration kit (DC to 6 GHz)
Contains fixed loads, open and short circuits, and 3.5-mm to 7-mm adapters. Option 001 deletes
3.5-mm to 7-mm adapters.
• 85033E 50
Ω 3.5-mm calibration kit (30kHz to 9 GHz)
Contains a female and male open and short, female and male load standard, and a torque wrench.
• 85050B 7-mm standard calibration kit (0.045 to 18 GHz)
Contains fixed loads, open and short circuits, and terminations.
• 85050C 7-mm TRL calibration kit (0.045 to 18 GHz)
Contains fixed loads, open and short circuits, terminations, and collets.
• 85050D 7-mm economy calibration kit (0.045 to 18 GHz)
Contains fixed loads, open and short circuits, and adapters.
• 85031B 7-mm RF calibration kit (30 kHz to 6 GHz)
Contains open and short circuits, and a coax termination.
• 85054B type-N standard calibration kit (0.045 to 18 GHz)
Contains fixed loads, sliding loads, open and short circuits, gages, and terminations. Option K11 adds a
PSC-N slotless contact repair kit.
• 85054D type-N economy calibration kit (0.045 to 18 GHz)
Contains fixed loads, open and short circuits, and terminationss.
• 85056A 2.4-mm standard calibration kit (0.045 to 50GHz)
Contains fixed loads, sliding loads, open and short circuits, and adapters.
• 85056D 2.4-mm economy calibration kit (0.045 to 50 GHz)
Contains fixed loads, open and short circuits, and adapters.