PowerLite X9 Multimedia Projector ® User’s Guide
Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Trademarks Epson and Instant Off are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite, PrivateLine, and Accolade are registered trademarks, SizeWise and Duet are trademarks, and Extra Care is a service mark of Epson America, Inc. Pixelworks, DNX, and the DNX logo are trademarks of Pixelworks, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 10 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . 10 Projector Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Projector Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . 13 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning the Projector On and Off . . . . . . . . . . . . . . . . . . . . 37 Using the Direct Power On Function . . . . . . . . . . . . . . 38 Shutting Down the Projector . . . . . . . . . . . . . . . . . . . . . 39 6 Contents 2 Displaying and Adjusting the Image . . . . . . . . 41 3 Presenting With the Remote Control . . . . . . . . 49 4 Fine-Tuning the Projector. . . . . . . . . . . . . . . . . . . 55 Selecting an Image Source . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Maintaining the Projector . . . . . . . . . . . . . . . . . . . 71 Cleaning the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Cleaning the Projector Case . . . . . . . . . . . . . . . . . . . . . . . . . 72 Cleaning the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Replacing the Air Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents
- Welcome The PowerLite ® X9 is an easy-to-use, compact, lightweight projector with a built-in speaker. It offers up to 2500 lumens of white and color light output (brightness). It also provides a native XGA resolution. You can connect it to a wide range of computers and video sources.
Additional enhancements: ■ Closed captioning ■ Audio and monitor out ■ 2000:1 contrast ratio (in Dynamic color mode with Auto Iris setting turned on) ■ Integral lens cover (A/V Mute slide) that won’t get lost ■ Low power, long-lasting lamp with 2 Power Consumption modes ■ Carrying case and remote control included Using Your Documentation This book contains all the information you need to set up and use your projector.
■ epson.com/support View FAQs (frequently asked questions) and e-mail your questions to Epson support 24 hours a day. ■ PrivateLine® support If you still need help after checking this User’s Guide and the sources listed in this section, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the PrivateLine card. Or take advantage of Epson’s automated support services 24 hours a day. See page 93 for more information.
Projector Parts Front Zoom ring Lamp cover Control panel Focus ring Ventilation slots Air filter cover A/V mute slide (lens cover) Foot release lever Adjustable Infrared foot receiver Air filter Kensington lock port Back USB (TypeB) port Monitor out port S-Video port Infrared receiver Video port Audio out port Rear adjustable foot AC power inlet Audio in port 12 Welcome Computer (Component Video) port Lamp cover screw Rear adjustable foot
Projector Control Panel Keystone button (corrects screen shape) Source Search button (searches for connected video sources) Menu button (displays projector menus) Esc button (exits menu items) Power light Help button Power button Volume down button Lamp and Temperature warning lights Keystone button (corrects screen shape) Volume up button Enter button (selects menu items) Welcome 13
Remote Control Source Search button (selects image source) Power button Source select buttons (USB not used) A/V Mute button (turns off image) Aspect button (changes screen size) Page Up/Down buttons (control PowerPoint® slides; USB cable required) E-Zoom +/– buttons (zoom into image) Menu button (accesses projector menus) 14 Welcome Freeze button (stops image) User button (lets you assign function) Color Mode button (changes display mode) Num button (activates number buttons) Esc button (exits menus) Me
Projector Dimensions Use the dimensions below to guide you in placing or installing the projector. 11.61 in. (295 mm) 1.5 in. (38.3 mm) 3.11 in. (79 mm) 1.57 in. (39.8 mm); center of lens to mounting bracket holes 3.03 in. (77 mm) 3.62 in. (92 mm) 9.59 in. (243.5 mm) 0.98 in. (25 mm) 5.04 in. (128 mm) 1.48 in. (37.5 mm) 3.66 in. (93 mm) 0.51 in. (13 mm) 8.98 in.
Registration and Warranty Your projector comes with a basic warranty that lets you project with confidence. For details, see the warranty brochure included with your projector. In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the brochure included with your projector for details.
Product Part number DC-06 document camera (ELPDC06) DC-10s document camera DC-11 document camera (ELPDC11) V12H321005 ELPDC10S V12H377020 AP-60 Projector Sound Solution Brightlink Solo Interactive Module (IU-01) Brightlink Solo Interactive Module (IU-01) with RM Easiteach V12H329020 V12H415020 V12H415020RM 1-Year Extended Depot Repair Service Plan 1-Year Extended Exchange Warranty 2-Year Extended Depot Repair Service Plan EPPFTPA1 EPPEXPA1 EPPFTPA2 You can purchase screens or other accessories from
Welcome
1 Setting Up the Projector This chapter tells you how to unpack the projector and connect it to a notebook or desktop computer or to video devices, such as a DVD player, VCR, or video camera.
Unpacking the Projector After unpacking the projector, make sure you have all these parts: Password Protected PDF manual and sticker registration CD-ROM Projector 2 AA batteries (for remote control) Power cord VGA computer cable Remote control Carrying case Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location. See page 79 for transportation instructions.
Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive a component video signal from a DVD player or other video device, you’ll need a component-to-VGA video cable. One may be included with your video equipment, or you can purchase the ELPKC19 cable from Epson. See “Optional Accessories” on page 16. ■ To receive an S-video signal, you’ll need an S-video cable. One may be included with your video equipment.
Image size increases with distance, but can vary depending on the aspect ratio (image shape), how you zoom into the image, and whether you’ve adjusted other image settings. Use the illustrations and tables below to help you determine the projection distance. (Conversion figures may have been rounded up or down.) Center of lens Center of lens You can also use the Image Size Calculator on the Epson website.
16:9 images Screen size Projection distance (A) Wide to Tele Offset (B) 30 inches (76 cm) 38 to 46 inches (97 to 117 cm) +0.3 inch (+1 cm) 40 inches (102 cm) 51 to 62 inches (130 to 156 cm) +0.4 inch (+1 cm) 50 inches (127 cm) 64 to 77 inches (163 to 196 cm) +0.5 inch (+1 cm) 60 inches (152 cm) 77 to 93 inches (196 to 236 cm) +0.5 inch (+1 cm) 80 inches (203 cm) 103 to 124 inches (263 to 316 cm) +0.7 inch (+2 cm) 100 inches (254 cm) 130 to 156 inches (329 to 396 cm) +0.
Screen size Projection distance (A) Wide to Tele Offset (B) 150 inches (381 cm) 190 to 228 inches (482 to 579 cm) –2.7 inches (–7 cm) 200 inches (508 cm) 253 to 304 inches (643 to 773 cm) –3.5 inches (–9 cm) 250 inches (635 cm) 317 to 381 inches (805 to 967 cm) –4.
You can also install the projector in three other viewing setups: ceiling projection, rear projection onto a semi-transparent screen, or rear/ ceiling projection. Ceiling projection Rear projection Rear/ceiling projection To project from overhead, you’ll need the optional ceiling mounting hardware (see page 16). You’ll also need to select the appropriate Projection setting in the projector’s Extended menu to orient the image correctly (see page 62).
Connecting to the USB Port You can connect a PC with a 32-bit version of Windows 7, Windows Vista®, Windows XP, or Windows 2000 (SP4) or a Macintosh computer with OS X 10.5.1 or 10.6.x to the projector’s TypeB (square) USB port and project your computer’s display. A USB 2.0 connection (recommended) provides better picture quality and response than USB 1.1. 1. Follow the instructions beginning on page 37 to turn on the projector. 2.
When you’ve finished making connections, see Chapter 2 for instructions on displaying and adjusting the image. When you’re done projecting from your computer, disconnect the USB cable. Installing Software The first time you connect a computer to the projector’s USB port, you will need to install software from the projector on your computer. Follow the instructions for your operating system. Windows 7 and Windows Vista When you see the Auto Play window, click Run EMP_UDSE.EXE.
Connecting to the VGA Computer Port You can connect to the projector using the VGA computer cable that came with it (the monitor port on your computer must be a D-sub 15-pin port). 1. Connect one end of the VGA computer cable to the projector’s Computer (Component Video) port and the other end to your computer’s monitor port. Computer (Component Video) port caution Don’t try to force a connector to fit a port with a different shape or number of pins.
4. You may also be able to use the remote control as a wireless mouse (see page 52). When you’ve finished making connections, see page 37 for instructions on turning on the projector and Chapter 2 for instructions on displaying and adjusting the image. Connecting to Video Equipment You can connect several video sources to the projector at the same time.
Connecting a Composite Video Source note If the video cable was not provided with your video device, you can purchase one from an electronics dealer. 1. If your video cable has an RCA connector, connect it to the yellow video output connector on your device and the yellow Video port on the projector. Video port 2. If you want to play sound through the projector, see page 35 for instructions on connecting an audio cable.
Connecting an S-video Source 1. Connect the S-video cable to the S-video connector on your device and the S-Video port on the projector. S-Video port note If the S-video cable was not provided with your video device, you can purchase one from Epson; see page 16. 2. If you want to play sound through the projector, see page 35 for instructions on connecting an audio cable.
Connecting a Component Video Source If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a component-to-VGA video cable from Epson (see page 16) or an electronics dealer. 1. Connect the component end of the cable (3 male RCA) to the Y/Cb/Cr (or Y/Pb/Pr) connectors on your device. 2.
Connecting an RGB Video Source You can connect to an RGB video source using the VGA computer cable provided with the projector. 1. Connect the cable to the RGB video port on your player and the Computer (Component Video) port on the projector. Computer (Component Video) port 2. You may need to change the Input Signal setting in the projector’s Signal menu to RGB (see page 60). 3. If you want to play sound through the projector, see page 35 for instructions on connecting audio cables.
Connecting an External Monitor note Some LCD monitors may not be able to display the image correctly. If you have trouble displaying the image, connect a multiscan monitor. If you’re projecting computer images, make sure the computer’s refresh rate is set to 65 Hz or greater. The projector must be turned on for the Monitor Out port to send a signal to the monitor (though it can be in standby mode). Make sure Standby Mode is set to Communication On in the Extended menu. See page 62.
Playing Sound Through the Projector You can play sound using the projector’s speaker system. 1. Connect a cable with a stereo mini-jack connector to the Audio port on the projector. Audio port 2. Connect the other end of the cable to the audio output connector(s) on your computer or video equipment.
Connecting External Speakers You can output sound from the projector to external speakers with a built-in amplifier. 1. Locate the appropriate cable to connect your speakers. Depending on your speakers, you may be able to use a standard audio cable with a stereo mini-jack connector on one end and pin jacks on the other end. For some speakers, you may need a special cable or adapter. 2. Connect the stereo mini-jack end of the audio cable to the Audio Out port on the projector. Audio cable 3.
Turning the Projector On and Off Turn on any connected computer or video equipment before starting the projector so it can automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually (see page 42). Follow these steps to turn on the projector: 1. Open the A/V Mute slide (lens cover). 2. Plug one end of the power cord into the projector, and the other end into an electrical outlet.
The Ppower light turns orange. Power light 3. Press the Ppower button on the projector or on the remote control. Power button warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children and pets. The projector beeps once and the Ppower light flashes green as the projector warms up, then an image begins to appear. When the Ppower light stops flashing and remains green, the projector is ready for use. 4.
2. Choose Operation and press Enter. 3. Choose Direct Power On and press Enter. 4. Highlight On and press Enter. 5. Press Menu to exit. The setting will take effect the next time you plug the projector into a power outlet. Shutting Down the Projector note This projector incorporates Instant Off technology. To turn it off, you can press its Ppower button as described below, unplug it, or turn off a power switch that supplies power to the projector.
Setting Up the Projector
2 Displaying and Adjusting the Image Follow the guidelines in this chapter for: ■ Selecting an image source ■ Adjusting the image 41
Selecting an Image Source You may need to select the image source if you have multiple image sources connected to the projector (such as a computer or DVD player). Selecting the image source lets you switch between images input from different pieces of connected equipment. If you don’t see the image you want, press the Source Search button on the remote control or the projector until you see the image you want to project.
Adjusting the Position of the Image If the image is too low on the screen, you can use the front adjustable foot to raise it. 1. Press the foot release lever up and lift the front of the projector. 2. Once the image is positioned where you want it, release the lever to lock the foot in position. 3. If the image is tilted or you need to fine-tune the height of the image, you can turn the projector’s adjustable rear feet.
Adjusting the Image Shape You can maintain a rectangular image by placing the projector directly in front of the screen and keeping it level. This also produces the best picture quality. If the projector is tilted up or down, the shape will “keystone” and you may need to correct the image shape. To correct keystone distortion, do one of the following: ■ Press the appropriate keystone correction button on the projector’s control panel until the shape is evenly rectangular.
Focusing and Zooming the Image Turn the focus ring on the projector to sharpen the image: To enlarge or reduce the image, turn the zoom ring: If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoom buttons on the remote control to zoom in on a portion of the image. See page 51 for instructions. Selecting the Color Mode The Color Mode adjusts the brightness, contrast, and color for various common viewing environments.
Select from one of these Color Mode options: ■ Dynamic: Brightest mode; for video games or TV in a bright room. ■ Presentation: For color presentations in a bright room. ■ Theatre: For natural-toned movies in a darkened room. ■ Photo: For vivid, high-contrast still images in a bright room (only available when the source is set to Computer or USB). ■ Sports: For vivid TV images in a bright room (only available for component video, S-video, or composite video sources).
Resizing Video Images You can resize your images by changing the aspect (width to height) ratio (depending on your input signal). Press the Aspect button on the remote control. Press the Aspect button repeatedly to cycle through the available options. note You cannot change the aspect ratio when displaying from a USB-connected computer.
Displaying and Adjusting the Image
3 Presenting With the Remote Control The projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 19.7 feet (6 meters) away.
Using the Remote Control note If a button is pressed for longer than 30 seconds, the remote control stops operating to conserve battery power. When you release the button, normal operation resumes. Using the remote control under bright fluorescent lamps or in direct sunlight may affect projector response. Make sure batteries are installed as described on page 78. Follow these tips for using the remote control: ■ Point the remote control at the front or back of the projector, or at the screen.
You can also set the Lens Cover Timer setting to automatically turn off the projector after 30 minutes to protect the projector if the A/V Mute slide is closed for a long time. See page 62 for instructions. Stopping Action Press the Freeze button on the remote control to stop the action in your video or computer image. The image freezes but the sound continues. To restart the action, press the Freeze button again. Freeze button note The Freeze function pauses the image, not the sound.
Controlling the Volume To change the volume on the projector, press the the remote control. or button on note To temporarily shut off the sound and picture, press the A/V Mute button or close the A/V Mute slide. Volume buttons You can also press the panel. or button on the projector’s control You can also adjust the volume using the projector’s menu system. See page 61.
To control presentation slides using the remote control’s Page Up or Page Down buttons, select Page Up/Down as the USB Type B setting on the Extended menu (see page 62). Then you can control your presentation using those buttons. Page up or down to change slides in PowerPoint Right-click Left-click If you want to use the remote control as a wireless mouse, select Wireless Mouse as the USB Type B setting on the Extended menu (see page 62).
Highlighting Your Presentation You can display a pointer to call out important information on the screen. If you want to customize the pointer tool, you can choose from three alternative shapes. Using the Pointer Tool 1. To activate the pointer tool, press the Pointer button on the remote control. A pointer appears on the screen. Pointer button If you prefer to use a different style of pointer, see the instructions in the next section. 2.
4 Fine-Tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features.
Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the remote control or on the projector. You see a menu screen similar to the one below: Options Menu list The menus are listed on the left and the options available for the highlighted menu are shown on the right. 2.
Restoring the Default Settings You can use the Reset option on any menu to restore the factory-default settings for the settings in that menu. To restore all the projector settings to their factory-default values, select the Reset menu, highlight Reset All, press Enter, and select Yes to confirm. note When you select Reset All in the Reset menu, it does not reset the Input Signal, User’s Logo, Language, or Lamp Hours settings.
note 2. Adjust the desired options as needed: The available settings vary depending on the input source selected. The Brightness setting changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Power Consumption in the Settings menu, then choose Normal or ECO (the default setting is Normal). ■ Color Mode Lets you quickly adjust the color and brightness for various environments. You can save a different setting for each source.
Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio. 1. Press the Menu button and select the Signal menu. You see a screen similar to one of those below. (The settings will be different depending on the source you are projecting from.
■ Tracking Adjust this value to eliminate vertical stripes in computer images. ■ Sync Adjust this value if computer images appear blurry or flicker. ■ Position If the image is slightly cut off on one or more sides, it may not be centered exactly. Select this setting and use the arrow buttons to center it. ■ note Progressive For composite video, S-video, and component video. Turn this setting on to convert interlaced signals into progressive signals (best for moving images).
Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, adjust audio volume, and customize several other features. ■ Keystone Adjusts the shape of the image if the projector has been tilted upward or downward. If you notice that lines or edges look jagged after adjustment, decrease the Sharpness setting (see page 57). ■ Control Panel Lock Lets you disable all of the buttons on the projector, or all of the buttons except the Ppower button.
Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable Direct Power On, use closed captioning, turn sleep mode on or off, and customize other projector operations. ■ Display Messages: Lets you turn screen messages on or off. Display Background: Sets the screen background to Black, Blue, or Logo when no image signal is available. Startup Screen: Enables or disables display of the startup (User’s Logo) screen when the projector is turned on.
■ Operation Direct Power On: Enable if you want to be able to start the projector when you connect the power cord (without pressing the Ppower button). Sleep Mode: Enable if you want the projector to turn off automatically if it is idle and no signal is received for 1 to 30 minutes (you can adjust the amount of time using the next setting). Sleep Mode Timer: When Sleep Mode is on, you can set the period of time before the projector turns off automatically, from 1 to 30 minutes.
Using the Projector Security Features To prevent unauthorized use of the projector, you can: caution If you lose the remote control, you will not be able to enter the password. Keep the remote control in a safe place at all times. Also, it’s a good idea to write down your password. 64 ■ Assign a password. You can use the password to prevent the projector from being turned on and prevent your custom startup screen from being changed. See the next section.
2. Select the type(s) of password protection you want to use: ■ Power On Protect: Prevents unauthorized use of the projector. After the projector is plugged in and turned on, you must enter a password to use the projector. Select On, press Enter, then press Esc to return to the Password Protect screen. ■ User’s Logo Protect: Prevents your custom screen (see page 66), display, and User’s Logo settings in the Extended menu from being changed.
If projection does not begin, check the following: ■ If the password is not correct, you see a message prompting you to re-enter the password. If you enter an incorrect password three times in succession, you see an error code with the message The projector’s operation will be locked and the projector switches to standby mode. Write down the error code, then disconnect the projector’s power cord from the electrical outlet, reconnect it, and turn the projector back on.
Capturing the Image Start by displaying the image you want to use from either a computer or video source, such as a DVD player or digital camera. Then follow these steps to capture the image and transfer it to the projector: note 1. Press the Menu button on the remote control, highlight the Extended menu, and press Enter. When you choose an image for the user’s logo, it erases any previously used image. You can save an image up to 300 × 400 pixels in size.
Choosing When to Display the Image After your image is saved, you can set it to display as the startup screen, the screen you see when there’s no signal, or the screen you see when you press the A/V Mute button (see page 50). 1. Press the Menu button, highlight the Extended menu, and press Enter. 2. Select Display and press Enter. 3. Choose from these display options: note You can lock these settings to prevent them from being changed without a password (see page 64).
5. Press the Menu button to exit. To disable the Control Panel Lock function, select Off in the Control Panel Lock menu. Or press and hold the Enter button on the projector’s control panel for seven seconds. A message is displayed and the lock is released. Using Security Locking The projector includes two security locking points to prevent its theft when installed or used in public locations: ■ Security cable attachment.
Fine-Tuning the Projector
5 Maintaining the Projector Y our projector needs little maintenance. All you have to do on a regular basis is clean the lens, and check that the air filter and vents are clean. A clogged air filter or vent can block ventilation needed to cool the projector. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely.
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. caution To remove dirt or smears on the lens, use a commercially available cloth for cleaning glasses. Do not rub the lens with harsh materials or subject the lens to shocks, or you may damage it. Cleaning the Projector Case Do not use wax, alcohol, benzene, paint thinner, or other chemical detergents. These can damage the case. Before cleaning, turn off the projector and unplug the power cord.
You can remove the air filter to clean both sides. If the filter is too dirty or broken, replace the filter as described below. Replacing the Air Filter You need to replace the air filter if: ■ You cannot remove the dust from it ■ The air filter is damaged or torn note ■ You repeatedly see a projected message telling you to clean or replace it To order replacement air filters, request part number V13H134A25. See page 16 for ordering information. 1. Turn off the projector and unplug the power cord.
4. Slide the new air filter into the slot until it clicks into place. 5. Close the air filter cover. Replacing the Lamp note Turn off this product when not in use to prolong the life of the projector. The life span of the projection lamp is about 4,000 hours if Power Consumption in the Settings menu is Normal (default), and 5,000 hours if this setting is ECO. See page 78 to check the lamp usage. It is time to replace the lamp when: 74 ■ The projected image gets darker or starts to deteriorate.
You may also need to replace the lamp if the red. See page 83. Lamp light flashes warning Let the lamp cool fully before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury. If the projector has been installed on the ceiling, you should stand to the side of the lamp cover, not underneath it. Lamp light Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L58.
4. Loosen the two screws holding the lamp in place (you can’t remove them). Loosen, but don’t remove these screws note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.) Then tighten its screws.
7. Replace the lamp cover, then tighten its screw. note Tighten the lamp cover securely so you do not receive a lamp cover error when you turn the projector back on. 8. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu system. 1. Press the Menu button on the remote control or on the projector’s control panel. You see the main menu. 2. Select the Reset menu and press Enter.
Checking Lamp Usage note The information displayed depends on the input signal currently selected. To check the number of hours the lamp has been used, press the Menu button and highlight the Info menu. You see a screen like this: If you have used the projector for less than 10 hours, the hours are listed as 0H. caution When replacing batteries, take the following precautions: ■ Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth.
3. Install two AA alkaline batteries, inserting the + and – ends as shown. 4. Replace the battery cover and press it down until it clicks into place. Transporting the Projector The projector contains many glass and precision parts. When hand-carrying the projector, use the carrying case. note Follow these guidelines to prevent damage when transporting it: Epson shall not be liable for any damages incurred during transportation. ■ Close the A/V Mute slide (lens cover).
Maintaining the Projector
6 Solving Problems This chapter helps you solve problems with your projector and tells you how to contact technical support for problems you can’t solve yourself.
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the ? Help button on the projector or the remote control. 1. Press the ? Help button on the remote control or on the projector. You see the Help menu: 2. Use the arrow buttons on the remote control or the projector to highlight menu items. 3. Press the Enter button on the remote control or the projector to select the menu item and read the solutions. 4.
Checking Projector Status If your projector isn’t working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status.
Error light(s) status Error light(s) status P Green or orange Flashing orange Off P Flashing red Off Flashing orange P Red Off Red Description It’s time to replace the lamp. See page 74 for instructions. If you continue to use the lamp after the replacement warning, there is an increased possibility that the lamp may break. Rapid cooling is in progress. Although this is not an abnormal condition, projection will stop automatically if the temperature rises higher.
Solving Projector Operation Problems The power doesn’t turn on. ■ If the projector doesn’t turn on when you press the Ppower button, make sure the power cord is connected to the projector and plugged into a working electrical outlet. ■ The power cord may be defective. Disconnect the cord from the outlet and contact Epson as described on page 93. ■ If you’re using the Direct Power On function and you immediately plug the power cord back in after unplugging it, the power may not turn back on.
■ The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer. ■ If you are projecting from a DVD player or other video source, make sure you turn it on and press its Play button. ■ If you are projecting from a composite or S-video video source, make sure the Video Signal setting is correct (see page 59). ■ You can also try resetting all of the menu settings (see page 57).
If you’re using Mac OS® X: 1. Open System Preferences. 2. Click Displays. 3. Click Detect Displays. 4. Do one of the following: ■ Mac OS X 10.6.x users: Click Show displays in menu bar. ■ Other Mac OS X users: Make sure the VGA Display or Color LCD dialog box is selected, click the Arrangement or Arrange tab, then make sure the Mirror Displays checkbox is selected. The message Not Supported is displayed. ■ Make sure the correct input signal is selected in the Signal menu (see page 59).
■ You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information. ■ If you’re projecting a widescreen computer image, adjust the Resolution setting (see page 59), if necessary. ■ If you’re projecting an image from a computer with dual display activated, turn dual display off. The image isn’t square, but keystone-shaped. If the image isn’t evenly rectangular, adjust its shape as described on page 44.
The image is blurry. ■ There may be dirt or smears on the lens. Clean the lens as described on page 72. ■ Adjust the focus using the focus ring (see page 45). ■ If the projector is angled sharply toward the screen, it may not be possible to focus the entire image. Move the projector to position it more directly in front of the screen. ■ Lower the projection angle to reduce the amount of keystone correction required.
2. Adjust the Tracking to eliminate vertical bands. 3. Adjust the Sync setting to increase the image sharpness. The image is too light or dark, or colors are incorrect. note Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor. 90 Solving Problems ■ Press the Color Mode button or select a different Color Mode option in the Image menu. See page 45 for details on the available options.
There is no sound, or the sound is not loud enough. ■ Use the Volume buttons to adjust the volume (see page 52), or adjust the Volume setting in the Settings menu. ■ If you’ve connected external speakers, make sure the volume on your speaker system is turned up. (When you connect external speakers, the projector’s speaker is disabled.) ■ Make sure A/V Mute is not enabled. (Press the A/V Mute button to disable it.
Solving Problems With the Remote Control The projector doesn’t respond to remote control commands. 92 Solving Problems ■ Point the remote control towards the projector’s receiver. Make sure you are within 19.7 feet (6 meters) of the projector and within a 30° horizontal angle and a 15° vertical angle from the projector’s front or back receiver. ■ The remote control’s batteries may not be installed correctly or may be low on power. To change the batteries, see page 78.
Where to Get Help Epson provides these technical support services: Internet Support Epson provides technical assistance 24 hours a day at epson.com/ support (U.S.) or epson.ca/support (Canada). Here you can access troubleshooting information, download product documentation, and receive technical advice through e-mail. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector.
Before you call for support, please have the following information ready: ■ Product name (PowerLite X9) ■ Product serial number (located on the bottom of the projector) ■ Proof of purchase (such as a store receipt) and date of purchase ■ Computer or video configuration ■ Description of the problem Purchase Supplies and Accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
A Technical Specifications General Type of display Poly-silicon TFT active matrix Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 16.
Keystone correction ±30° vertical Tilt angle: 0 to 12° Projection Lamp note Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Turn off this product when not in use to prolong the life of the projector. Type UHE (Ultra High Efficiency) Power consumption 200 W Lamp life Approx. 4,000 hours (Normal mode) Approx. 5,000 hours (ECO mode) Part number V13H010L58 Remote Control Range 19.
Environmental Temperature Humidity (non-condensing) Operating altitude Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Operating: 20 to 80% RH 0 to 7500 ft (0 to 2286 m); over 4921 ft (1500 m), enable High Altitude mode in the Extended menu (see page 62) Safety and Approvals United States FCC 47CFR Part 15B Class B (DoC) UL60950-1 Second Edition (cTUVus Mark) Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 Pixelworks™ DNX™ ICs are used in this projector.
Computer, component video, composite video, and S-video 98 Technical Specifications Mode Refresh rate (Hz) Resolution VGA—60 VESA—72 VESA—75 VESA—85 60 72 75 85 640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 56 60 72 75 85 800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 XGA—60 XGA—70 XGA—75 XGA—85 60 70 75 85 1024 × 768* 1024 × 768* 1024 × 768* 1024 × 768* SXGA1—70 SXGA1—75 70 75 1152 × 864 1152 × 864 WXGA—60 WXGA—75 60 75 1280 × 800 1280 × 800 SXGA2—6
Computer, component video, composite video, and S-video (continued) Mode Refresh rate (Hz) Resolution NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM 60 60 50 50 60 60 50 720 × 480 720 × 480 720 × 576 720 × 576 720 × 576 720 × 576 720 × 576 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i) 60 50 60 50 60/50 60/50 720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 * Native resolution Technical Specifications 99
Technical Specifications
B Notices This appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not look into the lens when the projector is on. The bright light can damage your eyes. ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not operate the projector on its side, or while tilted to one side.
Notices ■ Never push objects of any kind through the cabinet slots. ■ Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle. ■ Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers, which could block vents underneath your projector.
■ Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■ Do not overload wall outlets, extension cords, or power strips. Do not insert the plug into a dusty outlet. This can cause fire or electric shock.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Index A C A/V Mute button, 50 display settings, 62, 68 A/V Mute slide closing, 50, 63, 79 opening, 37, 50, 85 Accessories, 16 to 17 Air filter cleaning, 72 to 73 ordering, 16 replacing, 73 to 74 Altitude, 63, 84, 97 Anti-theft device, 16, 24, 69 Aspect ratio, 47, 60, 95 Audio cable, 35 connecting equipment, 35 to 36 controlling volume, 52 problems, troubleshooting, 91 turning off (using A/V Mute), 50 Auto Iris setting, 58 Auto Setup setting, 59 Cables audio, 35 component-to-VGA, 16, 29, 32 composite, 29,
Contrast ratio, 10, 95 Contrast setting, 58 Control Panel Lock setting, 61, 68 to 69, 85 Custom screen, see User’s Logo D Default settings, restoring, 57 Dimensions, projector, 96 Direct Power On, 38 Distance from projector to screen, 22 to 24, 95 Documentation, 10 to 11 DVD player, connecting, 29 to 33 Dynamic color mode, 46 E Electrical specifications, 96 Environmental specifications, 97 Epson accessories, 16 to 17 PrivateLine Support, 11 technical support, 11, 93 to 94 warranty, 16 Error status lights,
Lens, cleaning, 72 Light output specifications, 95 Lights, status, 83 to 84 Locking buttons, 68 to 69 projector, 69 Logo, saving on projector, 66 to 68 M Macintosh display problems, 87 Manuals, 10 Menus changing settings, 56 default settings, restoring, 57 Extended, 62 to 63 Image, 57 to 58 Info, 78 Reset, 57, 77 Settings, 61 Signal, 59 to 60 User’s Logo, 67 Monitor, connecting external, 34 Mouse, using remote control as, 52 to 53 N No Signal message, 86 to 87 Noise level, 95 Not Supported message, 87 Num
R Raising image, 43 Rear-screen projection, 25, 62 Registration, 16 Remote control A/V Mute button, 50 as wireless mouse, 52 to 53 batteries used, 96 batteries, replacing, 78 to 79 correcting color, 45, 58 E-Zoom buttons, 51 Freeze button, 51 numeric keypad, using, 65 pointer tool, using, 54 problems, 92 range, 96 specifications, 96 troubleshooting, 92 using, 50 Replacing lamp, 74 to 77 Request code, password, 66 Resetting lamp timer, 77 Resetting menu options, 57 Resize image, 47 Resolution, 47, 87, 95 Res
Troubleshooting blank screen, 85 to 86 cut-off image, 87 to 88 distorted image, 44 image and sound problems, 85 to 91 no signal, 86 to 87 projector problems, 81 to 94 remote control problems, 92 tapered image, 44 Turning off picture (using A/V Mute), 50 Turning off projector, 39 Z Zoom ratio, 95 Zoom ring, 45 Zooming image, 45, 51 U Unpacking projector, 20 USB cable, 26 to 27 connecting for display, 26 to 27 selecting TypeB port usage, 52, 63 User’s Logo creating, 67 display settings, 68 V VCR, connectin
