User's Guide

Table Of Contents

3. Verify that an SSID and IP address are displayed, then remove the wireless LAN module from the

projector.

4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module.

You see a projected message that the network information update is complete.

5. Remove the USB key.

6. Reinsert the wireless LAN module into the projector.

7. Now connect the USB key to a USB port on your computer or notebook.

Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then

select Allow on the next screen.

8. Follow the on-screen instructions to install the Quick Wireless Connection driver.

Note: If you see a Windows Firewall message, click Yes to disable the firewall for this application.