User's Guide

Table Of Contents

Power light Status light Lamp light Temp light Status and solution

Off Flashing blue Off Orange Projector has overheated and

turned off. Leave it turned off to

cool down. Once the Temp and

Status lights turn off and the power

light turns blue (after about five

minutes), try the suggestions

below:

• Make sure that the vents and air

filter are not clogged with dust or

obstructed by nearby objects.

• Clean or replace the air filter.

• If operating the projector at high

altitude, turn on High Altitude

Mode.

• If the problem persists, unplug

the projector and contact Epson

for help.

Off Flashing blue Orange Off Lamp has a problem.

• Check to see if the lamp is

burned out, broken, or installed

incorrectly. Reseat or replace the

lamp as necessary.