PowerLite S9/1220/1260 Multimedia Projector ® User’s Guide
Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Trademarks Epson and Instant Off are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite, PrivateLine, and Accolade are registered trademarks, SizeWise and Duet are trademarks, and Extra Care is a service mark of Epson America, Inc. Pixelworks, DNX, and the DNX logo are trademarks of Pixelworks, Inc. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 10 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . 10 Projector Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Projector Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . 14 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing Sound Through the Projector . . . . . . . . . . . . . . . . . 40 Connecting External Speakers (PowerLite S9 Only) . . . . . . . . . . . . . . . . . . . . . . 41 Connecting a Digital Camera or Other USB Device (PowerLite 1220/PowerLite 1260 Only) . . . . . . . . . . . 42 Turning the Projector On and Off . . . . . . . . . . . . . . . . . . . . 43 Using the Direct Power On Function . . . . . . . . . . . . . . 45 Shutting Down the Projector . . . . . . . . . . . . . . . . . . . . .
4 Fine-Tuning the Projector . . . . . . . . . . . . . . . . . . . 65 5 Maintaining the Projector . . . . . . . . . . . . . . . . . . . 81 6 Solving Problems Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . . 67 Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Adjusting Signal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Technical Specifications . . . . . . . . . . . . . . . . . . . . 105 B Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 117 FCC Compliance Statement. . . . . . . . . . . . . . . . . . . . . . . . 120 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- Welcome The PowerLite ® S9/1220/1260 is an easy-to-use, compact, lightweight projector with a built-in speaker. It offers up to 2500 (PowerLite S9) or 2600 (PowerLite 1220/PowerLite 1260) lumens of white and color light output (brightness). It also provides a native SVGA (PowerLite S9), XGA (PowerLite 1220), or WXGA (PowerLite 1260) resolution. You can connect it to a wide range of computers and video sources.
Additional enhancements: ■ Closed captioning (PowerLite S9 only) ■ Audio and monitor out (PowerLite S9 only) ■ 2000:1 contrast ratio (in Dynamic color mode with Auto Iris setting turned on) ■ Integral lens cover (A/V Mute slide) that won’t get lost ■ Low power, long-lasting lamp with 2 Power Consumption modes ■ Carrying case and remote control included Using Your Documentation note Your projector may differ from the illustrations shown, but the instructions are the same.
■ epson.com/support View FAQs (frequently asked questions) and e-mail your questions to Epson support 24 hours a day. ■ PrivateLine® support If you still need help after checking this User’s Guide and the sources listed in this section, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the PrivateLine card. Or take advantage of Epson’s automated support services 24 hours a day. See page 102 for more information.
Projector Parts PowerLite S9 Front Lamp cover Control panel Focus ring Ventilation slots Air filter cover A/V mute slide (lens cover) Foot release lever Adjustable foot Infrared receiver Air filter Kensington lock port PowerLite 1220/PowerLite 1260 Front Zoom ring Lamp cover Ventilation slots Focus ring Control panel Air filter cover A/V mute slide (lens cover) Foot release lever Adjustable Infrared foot receiver 12 Welcome Air filter Kensington lock port
PowerLite S9 Back USB (TypeB) port Monitor out port S-Video port Infrared receiver Video port Audio out port Computer (Component Video) port Lamp cover screw AC power inlet Rear adjustable foot Rear adjustable foot Audio in port PowerLite 1220/PowerLite 1260 Back USB (TypeB) port S-Video port Video port Infrared receiver Rear adjustable foot Computer (Component Video) port AC USB power (TypeA) inlet port HDMI port Lamp cover screw Rear adjustable foot Audio ports Welcome 13
Projector Control Panel PowerLite S9 Keystone button (corrects screen shape) Source Search button (searches for connected video sources) Esc button (exits menu items) Menu button (displays projector menus) Power light Help button Power button Tele button (decreases image size) Wide button (increases image size) Lamp and Temperature warning lights Keystone button (corrects screen shape) Enter button (selects menu items) PowerLite 1220/PowerLite 1260 Keystone button (corrects screen shape) Source Sear
Remote Control Source Search and Source buttons (select image source) Power button A/V Mute button (turns off image) Aspect button (changes screen size) Page Up/Down buttons (control PowerPoint® slides; USB cable required) E-Zoom +/– buttons (zoom into image) Menu button (accesses projector menus) Freeze button (stops image) User button (lets you assign function) Color Mode button (changes display mode) Num button (activates number buttons) Esc button (exits menus) Menu navigation (arrow) buttons and Ente
Projector Dimensions Use the dimensions below to guide you in placing or installing the projector. 11.61 in. (295 mm) 1.5 in. (38.3 mm) 3.11 in. (79 mm) 1.57 in. (39.8 mm); center of lens to mounting bracket holes 3.03 in. (77 mm) 3.62 in. (92 mm) 9.59 in. (243.5 mm) 0.98 in. (25 mm) 5.04 in. (128 mm) 1.48 in. (37.5 mm) 3.66 in. (93 mm) 0.51 in. (13 mm) 8.98 in.
Registration and Warranty Your projector comes with a basic warranty that lets you project with confidence. For details, see the warranty brochure included with your projector. In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada. See the brochure included with your projector for details.
Product Part number Component-to-VGA video cable S-Video cable ELPKC19 ELPSV01 DC-06 document camera (ELPDC06) DC-10s document camera DC-11 document camera (ELPDC11) V12H321005 ELPDC10S V12H377020 Molded hard-shell wheeled carrying case ELPKS58 You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
1 Setting Up the Projector T his chapter tells you how to unpack the projector and connect it to a notebook or desktop computer or to video devices, such as a VCR, DVD player, or video camera. You can also connect the projector to a USB storage device or digital camera (PowerLite 1220/PowerLite 1260 only).
Unpacking the Projector After unpacking the projector, make sure you have all these parts: PowerLite S9 Password Protected PDF manuals and sticker registration CD-ROM Projector 2 AA batteries (for remote control) Power cord VGA computer cable 20 Setting Up the Projector Remote control Carrying case
PowerLite 1220/PowerLite 1260 Password Protected PDF manuals and sticker registration CD-ROM Projector 2 AA batteries (for remote control) Power cord Remote control VGA computer cable USB cable Carrying case Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location. See page 89 for transportation instructions. If you are moving the projector by hand, use the carrying case.
Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an HDMI signal from your video device, you’ll need an HDMI cable (PowerLite 1220/PowerLite 1260 only). One may be provided with your video equipment. ■ To receive a component video signal from a DVD player or other video device, you’ll need a component-to-VGA video cable. One may be included with your video equipment, or you can purchase the ELPKC19 cable from Epson.
Image size increases with distance, but can vary depending on the aspect ratio (image shape), how you zoom into the image, and whether you’ve adjusted other image settings. Use the illustrations and tables below to help you determine the projection distance. Center of lens Center of lens You can also use the Image Size Calculator on the Epson website.
PowerLite S9 (16:9 images) Screen size Projection distance (A) Wide to Tele Offset (B) 30 inches (76 cm) 37 to 51 inches (95 to 130 cm) +0.3 inch (+1 cm) 50 inches (127 cm) 63 to 86 inches (161 to 218 cm) + 0.5 inch (+1 cm) 60 inches (152 cm) 76 to 103 inches (193 to 262 cm) +0.6 inch (+2 cm) 80 inches (203 cm) 102 to 138 inches (259 to 350 cm) +0.8 inch (+2 cm) 100 inches (254 cm) 128 to 173 inches (324 to 438 cm) +1.
PowerLite 1220 (4:3 images) Screen size Projection distance (A) Wide to Tele Offset (B) 30 inches (76 cm) 35 to 42 inches (89 to 107 cm) –2 inches (–5 cm) 40 inches (102 cm) 47 to 56 inches (119 to 143 cm) –2.7 inches (–7 cm) 50 inches (127 cm) 59 to 71 inches (150 to 180 cm) –3.3 inches (–8 cm) 60 inches (152 cm) 71 to 85 inches (180 to 217 cm) –4 inches (–10 cm) 80 inches (203 cm) 95 to 114 inches (241 to 290 cm) –5.
Screen size Projection distance (A) Wide to Tele Offset (B) 150 inches (381 cm) 195 to 234 inches (495 to 595 cm) +1.4 inches (+3 cm) 200 inches (508 cm) 260 to 313 inches (661 to 794 cm) +1.8 inches (+5 cm) 250 inches (635 cm) 326 to 391 inches (827 to 994 cm) +2.3 inches (+6 cm) 275 inches (699 cm) 358 to 430 inches (910 to 1093 cm) +2.
PowerLite 1260 (4:3 image) Screen size Projection distance (A) Wide to Tele Offset (B) 40 inches (102 cm) 50 to 60 inches (126 to 152 cm) –3.4 inches (–9 cm) 50 inches (127 cm) 62 to 75 inches (158 to 190 cm) –4.3 inches (–11 cm) 60 inches (152 cm) 75 to 90 inches (190 to 229 cm) –5.1 inches (–13 cm) 80 inches (203 cm) 100 to 121 inches (255 to 306 cm) –6.9 inches (–17 cm) 100 inches (254 cm) 126 to 151 inches (319 to 383 cm) –8.
PowerLite 1260 (16:10 image) Diagonal screen size Projection distance (A) Wide to Tele Offset (B) 40 inches (102 cm) 44 to 53 inches (111 to 134 cm) –3 inches (–8 cm) 50 inches (127 cm) 55 to 66 inches (139 to 168 cm) –3.8 inches (–10 cm) 60 inches (152 cm) 66 to 79 inches (168 to 202 cm) –4.5 inches (–12 cm) 80 inches (203 cm) 88 to 106 inches (225 to 270 cm) –6.1 inches (–15 cm) 100 inches (254 cm) 111 to 133 inches (281 to 338 cm) –7.
You can also install the projector in three other viewing setups: ceiling projection, rear projection onto a semi-transparent screen, or rear/ ceiling projection. Ceiling projection Rear projection Rear/ceiling projection To project from overhead, you’ll need the optional ceiling mounting hardware (see page 17). You’ll also need to select the appropriate Projection setting in the projector’s Extended menu to orient the image correctly (see page 73).
Connecting to the USB Port You can connect a PC with a 32-bit version of Windows 7, Windows Vista®, Windows XP, or Windows 2000 (SP4) or a Macintosh computer with OS X 10.5.1 or 10.6.x to the projector’s TypeB (square) USB port and project your computer’s display. A USB 2.0 connection (recommended) provides better picture quality and response than USB 1.1. 1. Follow the instructions beginning on page 43 to turn on the projector. 2.
When you’ve finished making connections, see Chapter 2 for instructions on displaying and adjusting the image. When you’re done projecting from your computer, disconnect the USB cable. Installing Software The first time you connect a computer to the projector’s USB port, you will need to install software from the projector on your computer. Follow the instructions for your operating system. Windows 7 and Windows Vista When you see the Auto Play window, click Run EMP_UDSE.EXE.
Connecting to the VGA Computer Port You can connect to the projector using the VGA computer cable that came with it (the monitor port on your computer must be a D-sub 15-pin port). 1. Connect one end of the VGA computer cable to the projector’s Computer (Component Video) port and the other end to your computer’s monitor port. PowerLite S9 Computer (Component Video) port caution Don’t try to force a connector to fit a port with a different shape or number of pins.
4. You may also be able to use the remote control as a wireless mouse (see page 58). When you’ve finished making connections, see page 43 for instructions on turning on the projector and Chapter 2 for instructions on displaying and adjusting the image. Connecting to Video Equipment You can connect several video sources to the projector at the same time.
Connecting an HDMI Video Source (PowerLite 1220/PowerLite 1260 Only) note If an HDMI cable was not provided with your video equipment, you can purchase one from an electronics dealer. For the best image and sound quality, connect your video equipment to the HDMI (High-Definition Multimedia Interface) port, if possible. Connect an HDMI cable to the HDMI connector on your video equipment and the HDMI connector on the projector.
Connecting a Composite Video Source 1. If your video cable has an RCA connector, connect it to the yellow video output connector on your device and the yellow Video port on the projector. note If the video cable was not provided with your video device, you can purchase one from an electronics dealer. PowerLite S9 Video port PowerLite 1220/PowerLite 1260 Video port 2. If you want to play sound through the projector, see page 40 for instructions on connecting an audio cable.
Connecting an S-Video Source note If the S-Video cable was not provided with your video device, you can purchase one from Epson; see page 17. 1. Connect the S-Video cable to the S-Video connector on your device and the S-Video port on the projector. PowerLite S9 S-Video port PowerLite 1220/PowerLite 1260 S-Video port 2. If you want to play sound through the projector, see page 40 for instructions on connecting an audio cable.
Connecting a Component Video Source If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a component-to-VGA video cable from Epson (see page 17) or an electronics dealer. 1. Connect the component end of the cable (3 male RCA) to the Y/ Cb/Cr (or Y/Pb/Pr) connectors on your device. 2.
4. If you want to play sound through the projector, see page 40 for instructions on connecting an audio cable. When you’ve finished making connections, see page 43 for instructions on turning on the projector and Chapter 2 for instructions on displaying and adjusting the image. Connecting an RGB Video Source You can connect to an RGB video source using the VGA computer cable provided with the projector. 1.
3. If you want to play sound through the projector, see page 40 for instructions on connecting audio cables. When you’ve finished making connections, see page 43 for instructions on turning on the projector and Chapter 2 for instructions on displaying and adjusting the image. Connecting an External Monitor (PowerLite S9 Only) If you want to monitor your computer presentation close-up (on a monitor placed beside the projector) as well as on the screen, you can connect an external monitor.
Playing Sound Through the Projector You can play sound through the projector’s speaker system. 1. Locate the appropriate cable and connect it to the Audio port on the projector. PowerLite S9 Audio port PowerLite 1220/PowerLite 1260 Audio ports 2. Connect the other end of the cable to the audio output connector(s) on your computer or video equipment.
Connecting External Speakers (PowerLite S9 Only) You can output sound from the projector to external speakers with a built-in amplifier. 1. Locate the appropriate cable to connect your speakers. Depending on your speakers, you may be able to use a standard audio cable with a stereo mini-jack connector on one end and pin jacks on the other end. For some speakers, you may need a special cable or adapter. 2. Connect the stereo mini-jack end of the audio cable to the Audio Out port on the projector.
note Use a cable less than 10 feet (3 meters) long and connect the camera or other device directly to the projector. Your projector may not function correctly if you use a longer cable or connect to a USB hub. If you connect a USB hard drive, make sure you use the AC adapter to power the hard drive.
4. If you are not connected to another image source, the Slideshow program appears. If you are connected to another image source, press the USB button on the remote control to go to the Slideshow program. 5. See page 61 for instructions on controlling the slideshow. 6. When you’re finished, press Esc and select Exit to exit the Slideshow before turning off or removing the USB device. Be sure to turn off your USB device (if necessary) before you remove the device or cable from the projector.
2. Plug one end of the power cord into the projector, and the other end into an electrical outlet. The Ppower light turns orange. Power light 3. Press the Ppower button on the projector or on the remote control.
The projector beeps once and the Ppower light flashes green as the projector warms up, then an image begins to appear. When the Ppower light stops flashing and remains green, the projector is ready for use. 4. If you are prompted to enter a password, see page 76. warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children. Using the Direct Power On Function The Direct Power On function enables faster setup.
Shutting Down the Projector note Lamp life will vary depending upon mode selected, environmental conditions, and usage. This projector incorporates Instant Off technology. To turn it off, you can press its Ppower button as described below, unplug it, or turn off a power switch that supplies power to the projector. You don’t have to wait for the projector to cool down first. Turn off this product when not in use to prolong the life of the projector. 1.
2 Displaying and Adjusting the Image Follow the guidelines in this chapter for: ■ Selecting an image source ■ Adjusting the image 47
Selecting an Image Source You may need to select the image source if you have multiple image sources connected to the projector (such as a computer or DVD player). Selecting the image source lets you switch between images input from different pieces of connected equipment. If you don’t see the image you want, press the Source Search button on the remote control or the projector until you see the image you want to project. Or, press one of the Source buttons on the remote control (Computer, Video, or USB).
Adjusting the Position of the Image If the image is too low on the screen, you can use the front adjustable foot to raise it. 1. Press the foot release lever up and lift the front of the projector. 2. Once the image is positioned where you want it, release the lever to lock the foot in position. 3. If the image is tilted or you need to fine-tune the height of the image, you can turn the projector’s adjustable rear feet.
The PowerLite 1220 and PowerLite 1260 projectors include an Auto Keystone function that detects and corrects vertical keystone distortion. It takes about one second after the projector starts for the image to be corrected. If your image is still distorted, or you are using the PowerLite S9 projector, do one of the following: ■ Press the appropriate keystone correction button on the projector’s control panel until the shape is evenly rectangular.
Focusing and Zooming the Image Turn the focus ring on the projector to sharpen the image. PowerLite S9 PowerLite 1220/PowerLite 1260 PowerLite S9: to enlarge or reduce the image, press the Wide (enlarge) or Tele (reduce) button on the projector’s control panel. You can also use the Zoom setting in the projector’s Settings menu; see page 71 for instructions. Wide button Tele button If the image still isn’t large enough, you may need to move the projector farther away from the screen.
Selecting the Color Mode The Color Mode adjusts the brightness, contrast, and color for various common viewing environments. Use this setting to quickly obtain a good picture. Press the Color Mode button on the remote control to select an option. Press it until the option you want is projected in the upper right corner. Color Mode button Select from one of these Color Mode options: ■ Dynamic: Brightest mode; for video games or TV in a bright room.
Resizing Video Images You can resize your images by changing the aspect (width to height) ratio (depending on your input signal). Press the Aspect button on the remote control. Press the Aspect button repeatedly to cycle through the available options. note You cannot change the aspect ratio when displaying from a computer using the USB TypeB port or from a USB device using the USB source on the PowerLite 1220/ PowerLite 1260.
PowerLite 1260 ■ Normal: Displays images using the full projection area and maintains the aspect ratio of the image. Choose this setting to automatically resize the image and make the best use of the display area. ■ Auto (HDMI images only): Automatically sets the aspect ratio according to the input signal. Choose this setting to project an HDMI image in the best aspect ratio. ■ 16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio images are elongated horizontally to fit.
3 Presenting With the Remote Control T he projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 19.7 feet (6 meters) away.
Using the Remote Control note If a button is pressed for longer than 30 seconds, the remote control stops operating to conserve battery power. When you release the button, normal operation resumes. Using the remote control under bright fluorescent lamps or in direct sunlight may affect projector response. Make sure batteries are installed as described on page 88. Follow these tips for using the remote control: ■ Point the remote control at the front or back of the projector, or at the screen.
You can also set the Lens Cover Timer setting to automatically turn off the projector after 30 minutes to protect the projector if the A/V Mute slide is closed for a long time. See page 73 for instructions. Stopping Action Press the Freeze button on the remote control to stop the action in your video or computer image. The image freezes but the sound continues. To restart the action, press the Freeze button again. Freeze button note The Freeze function pauses the image, not the sound.
Controlling the Volume To change the volume on the projector, press the the remote control. or button on note To temporarily shut off the sound and picture, press the A/V Mute button or close the A/V Mute slide. Volume buttons On the PowerLite 1220/PowerLite 1260 projector, you can also press the or button on the projector’s control panel. You can also adjust the volume using the projector’s menu system. See page 72.
To control presentation slides using the remote control’s Page Up or Page Down buttons, select Page Up/Down as the USB Type B setting on the Extended menu (see page 73). Then you can control your presentation using those buttons. Page up or down to change slides in PowerPoint Right-click Left-click If you want to use the remote control as a wireless mouse, select Wireless Mouse as the USB Type B setting on the Extended menu (see page 73).
Highlighting Your Presentation You can display a pointer to call out important information on the screen. If you want to customize the pointer tool, you can choose from three alternative shapes. Using the Pointer Tool 1. To activate the pointer tool, press the Pointer button on the remote control. A pointer appears on the screen. Pointer button If you prefer to use a different style of pointer, see the instructions in the next section. 2.
Presenting a Slideshow (PowerLite 1220/PowerLite 1260 Only) You can use your projector’s Slideshow feature whenever you connect a USB device that contains .JPG image files. This lets you quickly and easily display individual images, or start a slideshow of all the images in a folder. You can control your slideshow using the projector remote control. For an instant PowerPoint presentation, convert your PowerPoint slides to individual .JPG files (save as *.jpg) and store them in a folder.
If you are not connected to another image source, the Slideshow program appears automatically. If necessary, press the arrow buttons on the remote control to highlight the device you want to present from, then press the Enter button. note To rotate a displayed image, press the u or d button on the remote control until it is displayed correctly. note To display a slideshow from a folder that is not open, highlight the folder and press the Esc button on the remote control.
■ If all the images in a folder do not fit on the Slideshow screen, highlight Next page at the bottom of the screen and press Enter to display the next screen full of images. Select Previous page at the top of the screen to select the previous screen. ■ To exit the slideshow, press Esc, select Exit, and press Enter. Selecting Slideshow Display Options To select slideshow options or add special effects, follow these steps: 1.
Option Available settings Screen switching time No does not switch file display automatically 1Sec. to 60Sec. displays files for the selected time and switches them automatically Effect Wipe transitions between images with a wipe effect Dissolve transitions between images with a dissolve effect Random transitions between images using a variety of effects in random order 3. When you are finished, highlight OK at the bottom of the screen and press Enter.
4 Fine-Tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features.
Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the remote control or on the projector. You see a menu screen similar to the one below: Options Menu list The menus are listed on the left and the options available for the highlighted menu are shown on the right. 2.
Restoring the Default Settings You can use the Reset option on any menu to restore the factory-default settings for the settings in that menu. To restore all the projector settings to their factory-default values, select the Reset menu, highlight Reset All, press Enter, and select Yes to confirm. note When you select Reset All in the Reset menu, it does not reset the Input Signal, User’s Logo, Language, or Lamp Hours settings.
note 2. Adjust the desired options as needed: The available settings vary depending on the input source selected. The Brightness setting changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Power Consumption in the Settings menu, then choose Normal or ECO (the default setting is Normal). ■ Color Mode Lets you quickly adjust the color and brightness for various environments. You can save a different setting for each source.
Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio. 1. Press the Menu button and select the Signal menu. You see a screen similar to one of those below. (The settings will be different depending on the source you are projecting from.
2. Adjust the desired options as needed: ■ note You can also use the remote control’s Auto button to automatically reset the projector’s Tracking, Sync, and Position settings. See page 99 for details. Auto Setup Leave this setting On to automatically optimize computer images. Turn it off if you want to save adjustments you have made to the Tracking, Sync, and Position settings. ■ Resolution Set to Auto to have the projector automatically identify the resolution of the input signal.
■ Video Signal (composite or S-Video signals only) Select the setting for the type of equipment you’ve connected to the Video port. Leave this setting at Auto unless you are using a 60-Hz PAL system (then select PAL60). ■ Aspect Sets the image’s aspect ratio (ratio of width to height). See page 53 for more information. Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, adjust audio volume, and customize several other features.
■ Control Panel Lock Lets you disable all of the buttons on the projector, or all of the buttons except the Ppower button. See page 79 for more information. ■ Pointer Shape Lets you choose from three alternative pointer shapes. See page 60 for more information. ■ Power Consumption Lets you select from two levels of brightness. The ECO setting reduces power consumption and projector noise, and extends the lamp’s operating life. ■ Volume Raises or lowers the volume of the projector’s speaker.
Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable Direct Power On, use closed captioning (PowerLite S9 only), turn sleep mode on or off, and customize other projector operations. ■ Display Messages: Lets you turn screen messages on or off. Display Background: Sets the screen background to Black, Blue, or Logo when no image signal is available.
■ Operation Direct Power On: Enable if you want to be able to start the projector when you connect the power cord (without pressing the Ppower button). Sleep Mode: Enable if you want the projector to turn off automatically if it is idle and no signal is received for 1 to 30 minutes (you can adjust the amount of time using the next setting). Sleep Mode Timer: When Sleep Mode is on, you can set the period of time before the projector turns off automatically, from 1 to 30 minutes.
Using the Projector Security Features To prevent unauthorized use of the projector, you can: ■ Assign a password. You can use the password to prevent the projector from being turned on and prevent your custom startup screen from being changed. See the next section. ■ Create a custom screen that is displayed at startup and/or when the A/V Mute button is pressed. The screen can be locked with a password to discourage theft and provides a way to identify the projector should it be stolen. See page 77.
2. Select the type(s) of password protection you want to use: ■ Power On Protect: Prevents unauthorized use of the projector. After the projector is plugged in and turned on, you must enter a password to use the projector. Select On, press Enter, then press Esc to return to the Password Protect screen. ■ Hold down User’s Logo Protect: Prevents your custom screen (see page 77), display, and User’s Logo settings in the Extended menu from being changed.
If projection does not begin, check the following: ■ If the password is not correct, you see a message prompting you to re-enter the password. If you enter an incorrect password three times in succession, you see an error code with the message The projector’s operation will be locked and the projector switches to standby mode. Write down the error code, then disconnect the projector’s power cord from the electrical outlet, reconnect it, and turn the projector back on.
Capturing the Image Start by displaying the image you want to use from either a computer or video source, such as a DVD player or digital camera. Then follow these steps to capture the image and transfer it to the projector: note When you choose an image for the user’s logo, it erases any previously used image. You can save an image up to 300 × 400 pixels in size. Once you have saved a new user’s logo, you cannot return to the factory default logo. 1.
Choosing When to Display the Image After your image is saved, you can set it to display as the startup screen, the screen you see when there’s no signal, or the screen you see when you press the A/V Mute button (see page 56). 1. Press the Menu button, highlight the Extended menu, and press Enter. 2. Select Display and press Enter. 3. Choose from these display options: note ■ Set Display Background to Logo to display your image when there is no signal.
5. Press the Menu button to exit. To disable the Control Panel Lock function, select Off in the Control Panel Lock menu. Or press and hold the Enter button on the projector’s control panel for seven seconds. A message is displayed and the lock is released. Using Security Locking The projector includes two security locking points to prevent its theft when installed or used in public locations: ■ Security cable attachment.
5 Maintaining the Projector Y our projector needs little maintenance. All you have to do on a regular basis is clean the lens, and check that the air filter and vents are clean. A clogged air filter or vent can block ventilation needed to cool the projector. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely.
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. caution To remove dirt or smears on the lens, use a commercially available cloth for cleaning glasses. Do not rub the lens with harsh materials or subject the lens to shocks, or you may damage it. Cleaning the Projector Case Do not use wax, alcohol, benzene, paint thinner, or other chemical detergents. These can damage the case. Before cleaning, turn off the projector and unplug the power cord.
You can remove the air filter to clean both sides. If the filter is too dirty or broken, replace the filter as described below. Replacing the Air Filter You need to replace the air filter if: ■ You cannot remove the dust from it ■ The air filter is damaged or torn note ■ You repeatedly see a projected message telling you to clean or replace it To order replacement air filters, request part number V13H134A25. See page 17 for ordering information. 1. Turn off the projector and unplug the power cord.
4. Slide the new air filter into the slot until it clicks into place. 5. Close the air filter cover. Replacing the Lamp note Turn off this product when not in use to prolong the life of the projector. The life span of the projection lamp is about 4,000 hours if Power Consumption in the Settings menu is Normal (default), and 5,000 hours if this setting is ECO. See page 88 to check the lamp usage. It is time to replace the lamp when: 84 ■ The projected image gets darker or starts to deteriorate.
You may also need to replace the lamp if the red. See page 93. Lamp light flashes warning Let the lamp cool fully before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury. If the projector has been installed on the ceiling, you should stand to the side of the lamp cover, not underneath it. Lamp light Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L58.
4. Loosen the two screws holding the lamp in place (you can’t remove them). Loosen, but don’t remove these screws note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.) Then tighten its screws.
7. Replace the lamp cover, then tighten its screw. note Tighten the lamp cover securely so you do not receive a lamp cover error when you turn the projector back on. 8. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu system. 1. Press the Menu button on the remote control or on the projector’s control panel. You see the main menu. 2. Select the Reset menu and press Enter.
Checking Lamp Usage note The information displayed depends on the input signal currently selected. To check the number of hours the lamp has been used, press the Menu button and highlight the Info menu. You see a screen like this: If you have used the projector for less than 10 hours, the hours are listed as 0H.
3. Install two AA alkaline batteries, inserting the + and – ends as shown. 4. Replace the battery cover and press it down until it clicks into place. Transporting the Projector The projector contains many glass and precision parts. When hand-carrying the projector, use the carrying case. note Follow these guidelines to prevent damage when transporting it: Epson shall not be liable for any damages incurred during transportation. ■ Close the A/V Mute slide (lens cover).
Maintaining the Projector
6 Solving Problems T his chapter helps you solve problems with your projector and tells you how to contact technical support for problems you can’t solve yourself.
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the ? Help button on the projector or the remote control. 1. Press the ? Help button on the remote control or on the projector. You see the Help menu: 2. Use the arrow buttons on the remote control or the projector to highlight menu items. 3. Press the Enter button on the remote control or the projector to select the menu item and read the solutions. 4.
Checking Projector Status If your projector isn’t working correctly, first turn it off and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status.
Error light(s) status Error light(s) status P Green or orange Flashing orange Off P Flashing red Off Flashing orange P Red Off Red Description It’s time to replace the lamp. See page 84 for instructions. If you continue to use the lamp after the replacement warning, there is an increased possibility that the lamp may break. Rapid cooling is in progress. Although this is not an abnormal condition, projection will stop automatically if the temperature rises higher.
Solving Projector Operation Problems The power doesn’t turn on. ■ If the projector doesn’t turn on when you press the Ppower button, make sure the power cord is connected to the projector and plugged into a working electrical outlet. ■ The power cord may be defective. Disconnect the cord from the outlet and contact Epson as described on page 102. ■ If you’re using the Direct Power On function and you immediately plug the power cord back in after unplugging it, the power may not turn back on.
■ The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer. ■ If you are projecting from a DVD player or other video source, make sure you turn it on and press its Play button. ■ If you are projecting from a composite or S-Video video source, make sure the Video Signal setting is correct (see page 69). ■ You can also try resetting all of the menu settings (see page 67).
If you’re using Mac OS X: 1. Open System Preferences. 2. Click Displays. 3. Click Detect Displays. 4. Make sure the VGA Display or Color LCD dialog box is selected. 5. Click the Arrangement or Arrange tab. 6. Make sure the Mirror Displays checkbox is selected. The message Not Supported is displayed. ■ Make sure the correct input signal is selected in the Signal menu (see page 69). ■ Make sure your computer’s resolution and frequency or refresh rate is supported by the projector (see page 108).
■ If you’re projecting a widescreen computer image, adjust the Resolution setting (see page 69), if necessary. ■ If you’re projecting an image from a computer with dual display activated, turn dual display off. The image isn’t square, but keystone-shaped. If the image isn’t evenly rectangular, adjust its shape as described on page 49. The image contains static or noise. 98 Solving Problems ■ If you’re using a computer cable longer than 6 feet (1.
The image is blurry. ■ There may be dirt or smears on the lens. Clean the lens as described on page 82. ■ Adjust the focus using the focus ring (see page 51). ■ If the projector is angled sharply toward the screen, it may not be possible to focus the entire image. Move the projector to position it more directly in front of the screen. ■ Lower the projection angle to reduce the amount of keystone correction required.
2. Adjust the Tracking to eliminate vertical bands. 3. Adjust the Sync setting to increase the image sharpness. The image is too light or dark, or colors are incorrect. note Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor. 100 Solving Problems ■ Press the Color Mode button or select a different Color Mode option in the Image menu. See page 52 for details on the available options.
There is no sound, or the sound is not loud enough. ■ Use the Volume buttons to adjust the volume (see page 58), or adjust the Volume setting in the Settings menu. ■ Make sure A/V Mute is not enabled. (Press the A/V Mute button to disable it.) ■ If your presentation includes computer audio, make sure the volume control on your computer is not turned all the way down or muted.
■ Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in direct sunlight. Strong lighting, especially fluorescent lights, may affect the projector’s infrared receivers. Also, turn off any nearby equipment that emits infrared energy, such as a radiant room heater. ■ If any buttons are held for longer than 30 seconds, the remote enters sleep mode. Release any button that is held to wake the remote.
Before you call for support, please have the following information ready: ■ Product name (PowerLite S9, PowerLite 1220, or PowerLite 1260) ■ Product serial number (located on the bottom of the projector) ■ Proof of purchase (such as a store receipt) and date of purchase ■ Computer or video configuration ■ Description of the problem Purchase Supplies and Accessories You can purchase screens and other accessories from an Epson authorized reseller.
Solving Problems
A Technical Specifications General Type of display Resolution (native format) Color reproduction Light output (brightness) Poly-silicon TFT active matrix PowerLite S9 800 × 600 pixels (SVGA) PowerLite 1220 1024 × 768 pixels (XGA) PowerLite 1260 1280 × 800 pixels (WXGA) 16.
Contrast ratio 2000:1 (Dynamic color mode, Normal Power Consumption, with Auto Iris setting turned on in the Image menu; see page 67) Image size PowerLite S9 (4:3 image) 30 to 350 inches (76.2 to 889 cm) PowerLite 1220 (4:3 image) 30 to 300 inches (76.2 to 762 cm) PowerLite 1260 (16:10 image) 33 to 320 inches (83.8 to 812.
Projection Lamp Type UHE (Ultra High Efficiency) Power consumption PowerLite S9 175 W PowerLite 1220/PowerLite 1260 200 W Lamp life Approx. 4,000 hours (Normal mode) Approx. 5,000 hours (ECO mode) Part number V13H010L58 Remote Control Range 19.7 feet (6 meters) Batteries (2) Alkaline AA note Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Turn off this product when not in use to prolong the life of the projector.
Environmental Temperature Humidity (non-condensing) Operating altitude Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Operating: 20 to 80% RH 0 to 7500 ft (0 to 2286 m); over 4921 ft (1500 m), enable High Altitude mode in the Extended menu (see page 73) Safety and Approvals United States FCC 47CFR Part 15B Class B (DoC) UL60950-1 Second Edition (cTUVus Mark) Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 Pixelworks™ DNX™ ICs are used in this projector.
PowerLite S9 Computer, component video, composite video, and S-Video Mode Refresh rate (Hz) Resolution VGA EGA 85 640 × 350 VGA—60 VESA—72 VESA—75 VESA—85 60 72 75 85 640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 56 60 72 75 85 800 × 600* 800 × 600* 800 × 600* 800 × 600* 800 × 600* XGA—60 XGA—70 XGA—75 XGA—85 60 70 75 85 1024 × 768 1024 × 768 1024 × 768 1024 × 768 SXGA1—70 SXGA1—75 70 75 1152 × 864 1152 × 864 WXGA—60 WXGA—75 60 75 1280 × 800 1280 × 800
Computer, component video, composite video, and S-Video (continued) Mode Refresh rate (Hz) Resolution NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM 60 60 50 50 60 60 50 720 × 480 720 × 480 720 × 576 720 × 576 720 × 576 720 × 576 720 × 576 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i) 60 50 60 50 60/50 60/50 720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 * Native resolution 110 Technical Specifications
PowerLite 1220 Computer, component video, composite video, and S-Video Mode Refresh rate (Hz) Resolution VGA EGA 85 640 × 350 VGA—60 VESA—72 VESA—75 VESA—85 60 72 75 85 640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 56 60 72 75 85 800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 XGA—60 XGA—70 XGA—75 XGA—85 60 70 75 85 1024 × 768* 1024 × 768* 1024 × 768* 1024 × 768* SXGA1—70 SXGA1—75 70 75 1152 × 864 1152 × 864 WXGA—60 WXGA—75 60 75 1280 × 800 1280 × 800
Computer, component video, composite video, and S-Video (continued) Mode Refresh rate (Hz) Resolution NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM 60 60 50 50 60 60 50 720 × 480 720 × 480 720 × 576 720 × 576 720 × 576 720 × 576 720 × 576 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i) 60 50 60 50 60/50 60/50 720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 Refresh rate (Hz) Resolution * Native resolution HDMI signals Mode VGA 60 640 × 480 SVGA 60 800 ×
PowerLite 1260 Computer, component video, composite video, and S-Video Mode Refresh rate (Hz) Resolution VGA EGA 85 640 × 350 VGA—60 VESA—72 VESA—75 VESA—85 60 72 75 85 640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 56 60 72 75 85 800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 XGA—60 XGA—70 XGA—75 XGA—85 60 70 75 85 1024 × 768 1024 × 768 1024 × 768 1024 × 768 SXGA1—70 SXGA1—75 SXGA1—85 SXGA1—100 70 75 85 100 1152 × 864 1152 × 864 1152 × 864 1152 × 864 WX
Computer, component video, composite video, and S-Video (continued) Mode Refresh rate (Hz) Resolution iMAC VGA iMAC SVGA iMAC XGA MAC13 MAC16 MAC19 MAC19-60 MAC21 117 95 75 67 75 75 60 75 640 × 480 800 × 600 1024 × 768 640 × 480 832 × 624 1024 × 768 1024 × 768 1152 × 870 NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM 60 60 50 50 60 60 50 720 × 480 720 × 480 720 × 576 720 × 576 720 × 576 720 × 576 720 × 576 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i) 60 50 60 50 60/50 60/5
HDMI signals Mode Refresh rate (Hz) Resolution VGA 60 640 × 480 SVGA 60 800 × 600 XGA 60 1024 × 768 WXGA 60 1280 × 800* SXGA SXGA 60 60 1280 × 960 1280 × 1024 SXGA+ 60 1400 × 1050 UXGA 60 1600 × 1200 SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) HDTV (1080i) HDTV (1080p) 60 50 60 50 60/50 60/50 60/50 720 × 480 720 × 576 720 × 480 720 × 576 1280 × 720 1920 × 1080 1920 × 1080 * Native Resolution Technical Specifications 115
Technical Specifications
B Notices This appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not look into the lens when the projector is on. The bright light can damage your eyes. ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not operate the projector on its side, or while tilted to one side.
Notices ■ Never push objects of any kind through the cabinet slots. ■ Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle. ■ Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers, which could block vents underneath your projector.
■ Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■ Do not overload wall outlets, extension cords, or power strips. Do not insert the plug into a dusty outlet. This can cause fire or electric shock.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Index A C A/V Mute button, 56 display settings, 73, 79 A/V Mute slide closing, 56, 74, 89 opening, 43, 56, 95 Accessories, 17 to 18 Air filter cleaning, 82 to 83 ordering, 17 replacing, 83 to 84 Altitude, 74, 94, 108 Anti-theft device, 10, 17, 28, 80 Aspect ratio, 53 to 54, 71, 106 Audio cable, 40 connecting equipment, 40 to 41 controlling volume, 58 problems, troubleshooting, 101 turning off (using A/V Mute), 56 Auto Iris setting, 68 Auto Keystone setting, 50, 71 Auto Setup setting, 70 Cables audio, 40
Contrast ratio, 10, 106 Contrast setting, 68 Control Panel Lock setting, 72, 79 to 80, 95 Custom screen, see User’s Logo Height of image, adjusting, 49 Help system, using, 92 Help, Epson, 10, 102 to 103 High Altitude mode, 74, 94, 108 D I Default settings, restoring, 67 Digital camera, connecting, 42 to 43 Dimensions, projector, 107 Direct Power On, 45 Distance from projector to screen, 23 to 28, 106 Documentation, 10 to 11 DVD player, connecting, 33 to 39 Dynamic color mode, 52 Image adjusting, 48 to
Laptop computer connecting to, 29 to 33 display problems, 95 to 96 selecting source, 48 Lens Cover Timer setting, 57, 74 Lens, cleaning, 82 Light output specifications, 105 Lights, status, 93 to 94 Locking buttons, 79 to 80 projector, 80 Logo, saving on projector, 77 to 79 M Macintosh display problems, 97 Manuals, 10 Menus changing settings, 66 default settings, restoring, 67 Extended, 73 to 74 Image, 67 to 68 Info, 88 Reset, 67, 87 Settings, 71 to 72 Signal, 69 to 71 User’s Logo, 78 Monitor, connecting ex
Projector cleaning, 82 disabling buttons, 79 to 80 distance from screen, 23 to 28, 106 features, 9 to 10 installing, 22 to 29 lamp specifications, 107 options, 17 to 18 password protection, 75 to 77 positioning, 22 to 29 resolution, 105 security features, 75 to 80 specifications, 105 to 108 transporting, 89 troubleshooting, 91 to 103 turning off, 46 turning on, 43 to 45 unpacking, 20 to 21 viewing information about, 88 R Raising image, 49 Rear-screen projection, 29, 73 Registration, 17 Remote control A/V M
sRGB color mode, 52 Startup screen creating, 77 to 79 settings, 79 user’s logo, see User’s Logo Status lights, 93 to 94 Support, see Technical support S-Video cable, 18, 36 Switching picture source, 48 Sync, adjusting, 70, 99 to 100 T Technical support, 11, 102 to 103 Tele button, 51 Temperature requirements, 108 status light, 93 to 94 Temperature, color, 68 Theatre color mode, 52 Through aspect setting, 54 Tint setting, 68 Tracking, adjusting, 70, 99 to 100 Transporting projector, 89 Troubleshooting blank
