PC Free Operation Guide
Contents 2 PC Free Summary Appendix What You Can Do Using PC Free. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PC Free Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Specifications for Files that can be Projected Using PC Free . . . . . . . . . . . . . . . 5 Supported movie data . . . . . . . . . . . .
PC Free Summary
What You Can Do Using PC Free What You Can Do Using PC Free You can use PC Free to directly project files stored on USB storage devices and digital cameras that are connected to the projector. 4 You can use PC Free to project individual movie or image files or to continuously project slide shows using more than one file. s "Projecting Image and Movie Files" p.13 s "Projecting Image Files in a Folder in Sequence (Slideshow)" p.
What You Can Do Using PC Free Specifications for Files that can be Projected Using PC Free Type File Type (Extension) Scenario .fse file .sit* Image .jpg Notes • Files with the extension ".jpeg" • CMYK color mode formats • Progressive formats Normally, the image may not be projected clearly if compression is set too high. Cannot project images with a resolution greater than 1280 × 800. • Cannot project images with a resolution greater than 1280 × 800. • Cannot project animated GIFs. .
Using PC Free
PC Free Operating Procedure 7 PC Free Operating Procedure Caution: Starting and Closing PC Free • If you use a USB hub, the connection do not operate correctly. Devices such as digital cameras and USB storage devices should be connected to the projector directly. • When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. Starting PC Free Procedure A Switch the projected image to USB. See your projector User’s Guide.
PC Free Operating Procedure 8 JPEG files and MPEG files are displayed as thumbnails (file contents are displayed as small images). Scenarios (FSE files and SIT files) are displayed as thumbnails as the first image in the slide. Other files or folders are displayed as icons as shown in the following table.
PC Free Operating Procedure Closing PC Free Procedure 9 Procedure A A If you are playing back a file, end the playback. Press the [h] button on the remote control or [w/ ], [v/ ], [/ ] buttons on the control panel to position the cursor on the file or folder you want to access. Ending movie or image playback s p.13 Ending scenario playback s p.11 Ending Slideshow s p.14 B Remove the USB device from the projector.
PC Free Operating Procedure Rotating the Image You can rotate the image in 90° increments when projecting an image file with PC Free. 10 Procedure Press the [h] button on the remote control or the [w/ ] and [v/ ] buttons on the control panel to rotate the image.
Projecting Files Created with PowerPoint Projecting Files Created with PowerPoint To project a PowerPoint file with PC Free, convert it to a FSE or SIT file by using the supplied EasyMP Slide Converter application software. See the EasyMP Slide Converter Operation Guide for details. In this Guide converted files are known as scenarios. This section describes the method for playing scenarios stored in a USB storage device, and the operations during scenario playback.
Projecting Files Created with PowerPoint q You can use the following function when projecting a scenario or image file.
Projecting Image and Movie Files Projecting Image and Movie Files Image and movie files stored on a USB storage device and image files on a digital camera can be projected using PC Free by either of the following two methods. • Projecting selected image and movie files This is a function for projecting single files. • Projecting all image and movie files in a folder in sequence (Slideshow) This is a function for projecting the file contents of a folder in order, one file at a time.
Projecting Image and Movie Files D Perform one of the following procedures to end playback. When playback has been ended, the file list will be displayed. • While projecting still images: Press the Esc button. • While projecting movies: Press the Esc button. On the screen that is displayed, select Exit, and then press the Enter button. q • Images can be rotated while projecting image files. s p.10 • You can make the following operations using the remote control while playing movie files.
Projecting Image and Movie Files 15 Procedure A Position the cursor on "Option" at the bottom of the file list screen, and then press the Enter button. B When the Option menu is displayed, set each of the items. Enable settings by positioning the cursor on the target item and pressing the Enter button. Details of the items are given below. Display order You can set the order of the files to be displayed. You can select sorting of the files into either Name order or Date order.
Appendix
Troubleshooting 17 Troubleshooting Refer to the EasyMP Slide Converter Operation Guide if you have problems while playing back a scenario. Cannot play back or display files in PC Free Check Remedy Are you trying to play back a file in a format that is not supported by PC Free? For information on files that can be played back in PC Free s "Specifications for Files that can be Projected Using PC Free" p.
Other functions Other functions Basic Scenario (SIT file) Editing For SIT files converted via Perform simplified conversion on EasyMP Slide Converter, it is possible to change the order in which images are projected, and set whether or not to display individual images. q Basic editing cannot be performed for FSE files.
Other functions D Move the cursor to the desired position, and then press the Enter button. 1 The slide to move 2 Cursor at the target destination E Once you have completed editing, position the cursor on "Edit Complete" at the top of screen, and then press the Enter button. The edited content can only be accessed while the USB storage device is connected to the projector.
Other functions 20 Registering a Digital Certificate to the Projector B When Security is set to EAP-TLS from the projector's Network menu, you need to register the client certificate and the CA certificate in the projector for authentication. This section describes the method for using PC Free to register a digital certificate that has been saved in a USB storage device, to the projector.
Other functions E When information on the certificate is displayed, check that the content is correct, and then position the cursor over "OK" and press the Enter button. When the message "Digital certificate imported." is displayed, registration is complete. Registering a CA Certificate Procedure A Connect the USB storage device on which the digital certificate is stored to the projector and start PC Free. s p.7 The file list screen is displayed.
Notices Notices 22 Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
