Operation Guide

Troubleshooting
48
Problems concerning EasyMP Network Projection
Cannot connect using EasyMP Network Projection
Check the message on the screen and then apply the following countermeasures.
When a connection is made using EasyMP Network Projection, the projected image remains as it is, and a connection
cannot be made from another computer.
Error Messages Remedy
Cannot connect to the projector using this version of
EasyMP Network Projection. Install the latest version of
EasyMP Network Projection.
Install the current version of EasyMP Network Projection from the EPSON Projector Software CD-ROM
supplied with the projector.
The most recent version of EasyMP Network Projection can be downloaded from the following
website.
www.epson.com/support (U.S. support) or www.epson.ca/support (Canada)
Check Remedy
Did the presenter leave the conference room without
cutting off the network connection?
With EasyMP Network Projection, the connection with the computer that was previously connected
can be cut off when another computer tries to connect with the projector, and it connects with the
computer that is trying to connect.
Therefore, when a Projector Keyword is not set for the projector, or if you know the Projector
Keyword, you can cut off the current connection and, if you perform a connection operation, you can
connect to the projector.
When a Projector Keyword is set for the projector, if you do not know the Projector Keyword, restart
the projector and reconnect.