Operation Guide

Using Multi-Screen Display

Adjusting the virtual display

After starting EasyMP Network Projection, the procedure for setting up

the virtual displays differs for Windows and Mac OS. The procedures are

explained separately below.

Check the following points before starting EasyMP Network Projection

when connecting via Wireless LAN. If the following points are not set

correctly, Multi-screen display cannot be used.

• When you use Quick Connection Mode, the SSID for the computer and

each projector must be the same.

• The wireless LAN system for the computer and each projector must be the

same.

You can modify the SSID and Wireless LAN system for the projector from

the Network menu in the projector's Configuration menu. See your User’s

Guide for more information.

Procedure

For Windows

A Select "Start" - "Programs" (or "All Programs") - "EPSON

Projector" - "EasyMP Network Projection" - "EasyMP

Network Projection V2.XX" to start EasyMP Network

Projection.

B If necessary, select "Quick Connection Mode" (only available

when the optional Wireless 802.11g/b/a Module is installed)

or "Advanced Connection Mode", and then click "OK."

The projector search results are displayed. To always connect using

the same Connection Mode, select Set the selected Connection

Mode as the default mode for future connections.

C Select the "Use multi-display" check box.

Display layout and Display properties are added at the bottom of

the screen.