User's Guide

Using the Projector on a Network 91
Enabling WEP Encryption
1. Press Menu, then highlight Network and press Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security and press Enter. Then press Enter again to
display the security options:
4. Highlight
WEP and press Enter.
5. For the WEP encryption setting, highlight
128Bit or 64Bit and
press
Enter.
6. For Format, highlight
ASCII to enable text input or HEX to
enable hexadecimal input. Then press
Enter.
7. If you chose
64Bit, choose Key ID 1, 2, 3, or 4.