User's Guide

90 Using the Projector on a Network
5. When you see the wireless LAN setting page, select
Setup
Complete
and press Enter. You see this screen:
6. Select
Yes and press Enter to save the settings.
7. Press the
Menu button and then close the configuration menu to
exit.
Using Wireless Security Options
If you have installed the optional Wireless 802.11g/b/a Module, you
can use the following security options when connecting to the
projector wirelessly: WEP encryption, WPA security, EAP-TLS
certificate validation, or LEAP, EAP, or PEAP authentication. To set
these security features on your wireless network, see your
documentation or get help from your network administrator. See the
following sections to enable the security option on your projector:
■ “Enabling WEP Encryption” on page 91
■ “Enabling WPA Security” on page 93
■ “Enabling EAP, LEAP, or PEAP Authentication” on page 94
■ “Enabling EAP-TLS Certificate Validation” on page 95