User's Guide

Fine-Tuning the Projector 129
5. Next, adjust the brightness of Level 5 for the same two projectors.
Match the brighter projector to the darker one.
6. Adjust and match the brightness of Levels 2, 3, and 4.
7. Adjust and match the G/R color correction for all levels. Then
adjust and match the B/Y correction for all levels.
8. If you are using three or more projectors, repeat steps 4 through 7
to match projector 3 to projector 2, then match projector 4 to
projector 3, and so on.
Projector Menu and Options List
The table below shows the options you can select based on the
projector menu you are viewing. Some options may not be available
depending on the projector model and input source you are using.
For more information on these menus and options, read this chapter.
Menu Options
Image Color Mode
Brightness
Contrast
Color Saturation
Tint
Sharpness
Abs. Color Temp.
Color Adjustment
Reset