User's Guide

Using the Projector on a Network 105
3. Choose Others and press Enter. You see the following screen:
4. Turn on the
RoomView setting.
5. Highlight the
Return button at the top of the screen, then press
Enter. Choose Setup complete and press Enter, then choose
Yes and press Enter to save the changes.
6. Press
Menu to exit.
7. Turn the projector off and then on again. The setting change will
take effect once the projector restarts.
Using a Browser to Control the Projector
You can use a standard web browser to monitor and control the
projector through the network.
1. Make sure that the projector is set up for your network, as
described on page 76 (for a wired connection) or page 81 (for a
wireless connection).