User's Guide

100 Using the Projector on a Network
When the selected problem or warning occurs, an e-mail message
is sent to the specified notification addresses. The subject line of
the e-mail is
EPSON Projector. The e-mail includes the
following information:
■ Line 1: The name of the projector where the problem has
occurred
■ Line 2: The IP address of the projector where the problem has
occurred
■ Line 3: Details of the problem
11. When you’re done making all necessary changes, select
Return,
select
Setup complete, and then select Yes to confirm that you
want to save the changes. Press
Menu to exit the menu system.
Using SNMP to Monitor the Projector
Network administrators can use SNMP (Simple Network
Management Protocol) to monitor projectors.
1. Press the
Menu button, select the Network menu, then press
Enter.
2. Choose
Network Configuration and press Enter.
3. Choose
Others and press Enter. You see the following screen:
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you’re monitoring.