User's Guide

Message Broadcasting 9

Solving Problems

If messages fail to display on the selected projectors, check the

following:

■ If the message does not appear on any of the projectors, check the

firewall settings on the computer running EasyMP Monitor.

Make sure EasyMP Monitor is selected as an exception.

■ If an individual projector fails to display the message, make sure

the

Standby Mode setting in the projector’s Extended menu is

set to

Communication On.

■ Try restarting the projector. If a projector user or presenter has

pressed the

Esc button to stop the message broadcast, the

projector will not receive messages until it is restarted.