User's Guide

104 Using the Projector on a Network
■ The A/V Mute button temporarily turns off the picture and
sound (see page 67).
■ The Pause button stops the image (see page 67).
■ The Volume buttons raise or lower the volume.
■ The Page-up/down buttons change slides when you project a
slideshow over a network or from a device connected to the
USB port.
■ The CC (Closed Captioning) button lets you display closed
captioning for content that provides it.
Using Crestron RoomView to Monitor
and Control the Projector
You can use Crestron RoomView to monitor and control the
projector through the network.
Setting up the Projector
1. Press the Menu button, select the Network menu, then press
Enter.
2. Choose
Network Configuration and press Enter.
note
You cannot use the web
browser control described on
page 101 or the Message
Broadcasting plug-in (see
page 12) while you are using
Crestron RoomView.
Standby Mode in the
Extended menu should be
set to
Communication On
to monitor or control the
projector in standby mode.
When accessing the projector
over a wireless connection,
use Advanced Mode (see
page 81).