Operation Guide

64
Turning a PowerPoint File into a Scenario
PowerPoint files can be converted to scenarios by the following three
methods. When you want to use a PowerPoint file as is, use either
method 1 or 2.
1 Batch conversion without starting EMP Slidemaker2
All of the slides in a PowerPoint presentation can be batch-converted into
a scenario. s "Converting all files in a single operation without starting
up SlideMaker2" p.65
2 Include a PowerPoint file from the file list
After the PowerPoint files have been batch converted to create scenarios,
an image or movie file can then be converted to create another scenario.
s "Starting up SlideMaker2 and Converting Files" p.67
3 Include only the slides you want from the thumbnails
Select only the PowerPoint slides you need and then convert them to a
scenario. s p.67
The following table shows the differences when using methods 1 to 3.
*1 When scenario creation is complete, the "Send Scenario" screen is
automatically displayed.
*2 After creating the scenario, perform "Sending Scenarios" s p.75.
q
• When creating scenarios with methods 1 or 2, the
following animations set in PowerPoint are also reflected
in the scenario.
• Animations other than those mentioned above are
replaced by the animations in "Animation Rules (Default:
Cut)".
s p.78
• The picture quality for scenarios created with method 1 is
"Normal". When you want to create a scenario with a
high image quality, use methods 2 or 3.
•Fly •Blinds •Box
• Checkerboard • Crawl • Dissolve
• Peek • Random Bars • Spiral
• Split • Stretch • Strips
•Swivel •Wi
p
e•Zoom
Image Quality
Animations
Retained
Send Scenario
1 "Normal" fixed Ye s Continuous
operation
*1
2 Select from "Highest
Quality", "High Quality" and
"Normal"
Yes Continuous
operation
*1
3 Select from "Highest
Quality", "High Quality" and
"Normal"
No Operating later
*2