Operation Guide
Table Of Contents
- Front Cover
- Contents
- EasyMP Summary
- Installing the Software
- Connecting with EMP NS Connection
- Convenient EMP NS Connection Functions
- Connecting to a Projector on a Different Sub-net
- Setting the EMP NS Connection Operation
- Using a Computer to Set Up, Monitor and Control Projectors
- Presentations Using PC Free
- Preparing a Scenario (Using EMP SlideMaker2)
- Appendix
- Copyrights and Trademarks
10
Preparing to Connect
Use the following steps to prepare the projector and computer for
connection.
Preparing the Computer
f For Windows
Make network settings for the computer by using the utility software
supplied with the LAN adapter. For more information on the utility
software, see the User's Guide supplied with your LAN adapter.
f For Macintosh
Set the network port and communication status. For more details on setting
the communication status, see the user’s guides for your computer or the
AirPort card.
A
Select "System Preferences" - "Network" from the
Apple menu.
The network settings screen is displayed.
B
Select the port used in "Port Configurations" and
click "Apply Now".
C
Close the screen.
Preparing the Projector
A
Turn on the projector and put it into projection
status.
B
Press the [Menu] button to display the configuration
menu, and then make network settings.
For details on making network settings, see your User's Guide.
Procedure
Procedure