User`s guide

Making detailed adjustments 53
■ Control Panel Lock to disable all the buttons on the projector’s control panel. A
message appears on the screen whenever you press a button with Control Panel Lock
turned on. To operate the projector, you must use the remote control.
4. Press
Menu to exit the menu system.
If you turned on the Control Panel Lock, the projector buttons are now locked.
If you turned on the Child Lock, turn off the projector and let it cool down. The Child
Lock takes effect after the cool-down period.
Password protection
The Password Protect option can be used to prevent theft or unauthorized use of your
projector in a home, business, or school setting. To access the password protect feature, press
the
Aspect button on the remote control and hold it down for about 5 seconds.
Select from these options:
■ Power On Protect
Set to On to request the password when you start projection after plugging the power
cable into the electrical outlet. (Direct Power On must be enabled; see page 48.)
■ User’s Logo Protect
Set to On to disable changing the User’s Logo. To change the User’s Logo Protect setting,
you must enter the password.
■ iPod Protection
Set to On to use an iPod to unlock the projector instead of entering the password. When
a registered iPod is connected to the projector, you do not need to enter the password
even if
Power On Protect is set to On. For information on registering your iPod, see
page 55.
To change your password:
1. Use the remote control to select
Password and press the enter button.
Note: The default password is “0000”.