User`s guide

52 Making detailed adjustments
7. When the message Save this image as the User’s Logo? appears, select Yes and press
the enter button. Saving the logo may take a few moments. Do not use your projector,
remote control, or video source while the logo is being saved.
8. When you see the message
Completed, press Menu to exit.
Choosing when to display the image
After your image is saved, you can set it to display as the startup screen, the screen you see
when there’s no signal, or the screen you see when you press the
A/V mute button on the
remote control.
1. Press the
Menu button on the remote control, highlight the Extended menu, and press
the enter button.
2. Select
Display and press the enter button.
3. Choose from these display options:
■ Set Display Background to Logo to display your image when there is no signal.
■ Set Startup Screen to On to display your image when the projector is warming up.
■ Set A/V mute to Logo to display your image when you press the A/V mute
button.
4. When you’re finished, press
Menu to exit.
Locking the projector
The projector includes two lock settings to prevent the image from being accidentally
changed once it’s adjusted, and to keep children from turning on the projector without adult
supervision.
To access the lock settings, follow these steps:
1. Press the
Menu button on the remote control.
2. Use the menu navigation buttons to open the
Settings menu.
3. Choose from these options:
■ Child Lock to disable the Ppower button on the projector’s control panel unless it is
pressed for about 3 seconds. (You can use the Ppower button to turn it off,
however.) Since you can still use the remote control to turn on the projector, you
may want to keep it away from children’s reach.