User`s guide

Making detailed adjustments 51
Creating your own startup screen
You can transfer any image from your computer or video source to the projector and then use
it as your startup screen. You can also use it as the screen displayed when the projector is not
receiving a signal or when you press the
A/V mute button. The image can be a company
logo, slogan, photograph, or any other image you want to use.
Note: When you choose an image for the user’s logo, it erases any previously used image. You
can save an image up to 300 × 400 pixels in size. Once you have saved a new user’s logo, you
cannot return to the factory default EPSON logo.
Capturing the image
Start by displaying the image you want to use from either a computer or video source, such as
a DVD player or digital camera. Then follow these steps to capture the image and transfer it
to the projector:
1. Press the
Menu button on the remote control, highlight the Extended menu, and press
the enter button.
2. Highlight
User’s Logo and press the enter button.
3. When you see a message asking
Choose this image as the User’s Logo?, select Yes
and press the enter button. A selection box displays over the image.
4. Use the u, d, l, or r buttons to select the area of the image you want to use. Then press
the enter button.
5. When you see the message
Select this image?, highlight Yes and press the enter
button.
6. Use the u, d, l, or r buttons to select a zoom factor (display size) and press the enter
button.