User`s guide

Making detailed adjustments 49
■ Standby Microphone
Select On to enable the projector for microphone use when it is in standby mode.
■ Plug-in Power
Select On when a microphone that supports plug-in power is connected.
■ Language
Select a language to use for the projector menus. (Press the Menu button, select
Extended, then select Language and press the enter button. Select a language, then
press the
Menu button to exit the menu system.)
■ Reset
Resets the items in the Extended menu to default values (except for the User’s Logo
and
Language settings).
Resetting the projector
If the image quality isn’t what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Settings menu), open that
menu, select
Reset, and confirm as needed. The example below shows how to reset the Image
menu settings:
You can also reset the lamp usage timer or restore all the projector settings to their original
values. Follow these steps:
1. Press the
Menu button on the remote control.
Open the Image
menu . . .
and select Reset.