User`s guide

48 Making detailed adjustments
Startup Screen: Enables or disables display of the startup (User’s Logo) screen when the
projector is turned on.
A/V mute: Sets the screen background to White (default), Black, Blue, or Logo when
the
A/V mute button is pressed.
■ Closed Caption
Lets you display closed captioning for content that provides it. This feature is only
available with composite video sources (Presenter i+ only).
■ User’s Logo
Create a custom startup screen, as described on page 51.
■ Projection
Select Front (to project onto the front of a screen), Front/Ceiling (when the projector is
mounted upside-down from the ceiling),
Rear (to project from behind onto a transparent
screen), or
Rear/Ceiling (to project from behind onto a transparent screen when the
projector is mounted upside-down from the ceiling).
Note: When an iPod is docked, this setting is grayed out and locked to “Front”. To change the
setting, first exit the menu and remove the iPod from the dock.
If you hold down the A/V mute button on the remote control for about five seconds, the
projector switches between Front and Front/Ceiling or Rear and Rear/Ceiling.
■ Operation
Direct Power On:
Enable if you want the projector to turn on when you connect the
power cord (without pressing the
Ppower button).
Note: If Direct Power On is enabled, the power cord is connected, and a power outage occurs,
the projector will start when the power is restored.
Sleep Mode: Turns the projector off automatically if it is idle and no signal is received
for 5, 10, or 30 minutes (you can adjust the amount of time in the
Sleep Mode setting
menu).
Lens Cover Timer: Enabled by default to turn the projector’s power off automatically
when the
A/V mute slide is closed for more than 30 minutes.
High Altitude Mode: Enable when you are using the projector above 4,921 feet (1,500
meters) to ensure that the temperature is regulated properly. Turn this setting off for
lower elevations.
Note: Do not use the projector at altitudes above 7,500 feet (2,286 meters).
Illumination: Turn off this setting to deactivate the projector’s Ppower button and
P power light. Use this setting if you find the lights distracting in a darkened room.