User`s guide

Projecting from an iPod, iPhone, or iPad 25
Configuring the screen saver
You can configure a screen saver to appear while playing music through the projector. You
can choose how long the projector will wait before displaying the screen saver.
To configure your screen saver, follow these steps:
1. Use the projector’s remote control to select
Setting > Screen Saver from the iPod
menu.
2. Press r. Select from the following screen saver options:
■ Off: the display will not switch to a screen saver
■ Dialog: the projector will display the current song information
■ Black out: the display will turn black
To select how long the projector will wait before activating a screen saver, select
Setting >
Timeout from the iPod menu. Select from the following times:
■ 5 mins
■ 15 mins
■ 30 mins
To select a time, highlight the option and press the enter button on the remote control.
Projecting photos, videos, and YouTube videos from your
iPod, iPhone, or iPad
To project photos, videos taken on your device, or YouTube videos:
1. Turn on the projector and then connect your device.
2. Press the button on the remote control to switch playback control to your device.
Note: The projector screen turns black until you select “play” on your device.