Product Information Guide

EPSON PowerLite 8200i/9100i Projector

12 - EPSON PowerLite 8200i/9100i 1/02

4. Use a screwdriver to loosen the three screws holding the

lamp unit in place. (You cannot remove these screws

completely.) Then lift the handle and pull out the lamp unit.

5. Gently insert the new lamp as shown below. Make sure it’s

inserted securely. Tighten the screws on the new lamp.

6. Replace the lamp cover and tighten the screws. (Make sure

the lamp cover is securely fastened. The projector turns itself

off if the lamp cover is open.)

7. Reset the lamp timer as described below.

Resetting the Lamp Timer

After you install a new lamp, you need to reset the timer so the

projector can keep track of how many hours it has been used.

Follow these steps:

1. Press the

Help

button and hold it down for at least 5

seconds. The Help menu will be displayed and then you will

see a menu asking if you want to reset the lamp ON time.

2. Use the left arrow button (control panel) or press left on the

Enter

button (remote control) to select

Yes

3. Press

Enter

to reset the timer.

Optional Accessories

EPSON provides the following optional accessories for the

PowerLite 8200i and the PowerLite 9100i. You can purchase

these accessories from your dealer or by calling EPSON at

(800) 873-7766; or visit the EPSON Store at

www.epsonstore.com (U.S. sales only). In Canada, please call

(800) 463-7766 for dealer referral.