User's Guide

112 Fine-Tuning the Projector
8. To enable your screen logo, select
User’s Logo Protect and press
Enter. Select On and press Enter.
When this feature is on, the logo appears whenever you turn on
the projector (if the
Startup Screen is enabled in the Extended
menu; see page 114). It also appears when you press the
A/V Mute button (if you selected the Logo for the A/V Mute
setting under Display in the Extended menu). None of the User’s
Logo features in the Extended menu can be changed when the
User’s Logo Protect function is enabled.
9. To enable network setting protection, select
Network Protect
and press
Enter. Select On and press Enter.
When this feature is on, none of the network settings on the
menu can be changed.
Starting the Projector with a Password
When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the
Num button on the remote control and use the
numeric keypad to enter the four digit password.
The password screen closes, the numeric keypad is automatically
deactivated, and projection begins.