User's Guide

56 Using the Projector on a Network
To enter numbers, use the buttons on the remote
control to highlight the number you want to input, then press
the
Enter button. When you’re finished entering an address
in the network menu, highlight
Return, then press the Enter
button.
9. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display setting to Off.
10. When you’re done making all necessary changes, select
Complete
and press the
Enter button to save your settings. Then press
Enter again to confirm.
Press
Menu to exit the menu system.
Configuring Basic Settings
You can give your projector a unique name, enable a projector
keyword, or create a password for controlling the projector over the
Web.
1. Press the
Menu button, then choose Network and press Enter.
2. Choose
Network Configuration and press Enter.
3. Choose
Basic and press Enter. You see the following screen: