User'sGuide Multimedia Projector 822p/83c
Table Of Contents
- Front Matter
- Contents
- Welcome
- Setting Up the Projector
- Projecting
- Using the Remote Control
- Fine-tuning the Projector
- Maintenance and Transportation
- Solving Problems
- Monitoring the Projector Over a Network
- Technical Specifications
- Notices
- Index
22 Setting Up the Projector
Playing Sound Through the Projector
You can connect a commercially available 3.5 mm stereo mini-jack
audio cable to take advantage of the projector’s built-in speaker. You
can obtain the audio cable from a computer or electronics dealer.
1. Connect one end of the 3.5 mm stereo mini-jack audio cable to
the corresponding
Audio1 or Audio2 jack on the projector.
2. Connect the other end of the audio cable to your laptop’s
headphone jack or audio-out jack, or your desktop’s
speaker or audio-out port.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 34 for instructions.
Audio1
and
Audio2
jacks