Product Information Guide

PowerLite 822p/83c Projector
10 - PowerLite 822p/83c Projector 3/08
Using the Remote Control
The remote control uses a line-of-sight infrared signal. It lets
you access the projector’s features from anywhere in the room—
up to 20 feet away. (This distance may be shorter if the remote
control batteries are low.)
The projector may not respond to remote control commands in
these conditions:
❏ You are too far away—not within 20 feet (6 meters)—or
not within 30° to the left or right of the front or rear sensor
or 15° above or below it
❏ The battery is weak or not installed correctly
❏ Ambient light is too bright
❏ A fluorescent light is shining into the infrared receiver
❏ A strong light source (such as direct sunlight) shines into the
infrared receiver
❏ Other equipment emitting infrared energy is present (such
as a radiant room heater)
❏ If a button on the remote control has been held for more
than 30 seconds, the remote enters sleep mode. Press
another button for normal operation.
Remote Control Buttons
Red Red Red There is an internal error in the
projector. Turn the projector off
and unplug it. Contact Epson for
help.
Power
light
Lamp
light
Temp.
light Description
Cycles through
8 color modes
Turns
projector
on or off
E-Zoom + zooms
in on (enlarges)
selected area and
E-Zoom –
reduces
the zoomed image
Selects another
image source
Turns off audio
and video;
press again to
resume
Selects a menu
option or displays
the next screen
or menu; Auto
function
automatically
adjusts computer
images to the
optimum settings
Freezes the
current video
or computer
image
Changes the
aspect ratio of
images from
4:3 to 16:9
Displays or hides
projector menus
Cancels current
function or
displays previous
menu or screen