User's Guide

98 Using the Projector on a Network
3. Press
Enter, or, if you set a Web control password in the
projector’s Network menu, enter your user name and password,
then press
Enter.
4. Select one of the menu options listed on the screen, then change
any of the settings as needed. These settings correspond to those
found in the projector’s menu system.
You cannot change the following settings using a web browser:
■ Pointer Shape, Test Pattern, or User Button in the
Settings menu
■ User’s Logo, High Altitude Mode, Lens Cover Timer and
Language in the Extended menu
■ Reset All and Reset Lamp Hours in the Reset menu
You can only change the following settings using a web browser:
■ SNMP Community Name
■ EasyMP Monitor password