User's Guide

Fine-Tuning the Projector 107
■ Position
If the image is slightly cut off on one or more sides, it may
not be centered exactly. Select this setting and use the
pointer buttons to center it.
■ Progressive
Turn this setting on for moving images, or select Off for still
images. If you notice video delays during high-speed gaming,
turn this setting off.
■ Noise Reduction
Smooths out rough images. You may need to experiment to
select the best setting for your image. Select
Off when viewing
low-noise image sources, such as DVDs.
■ Input Signal
If the colors don’t look right on the Auto setting, select the
setting for the type of equipment you’ve connected to the
Computer1 or Computer2 port:
RGB: For a computer connection.
Component: For a video player that outputs a component
video signal.
■ Video Signal
Leave this setting at
Auto unless you are using a 60-Hz PAL
system (then select
PAL60).
■ Aspect
Choose an aspect ratio setting that allows the image to fit best
in the display area. See page 36 for details.