User's Guide

104 Fine-Tuning the Projector
To restore all the projector settings to their factory-default values,
select the
Reset menu, highlight Reset All, and press Enter.
Adjusting the Image
You can use the Image menu to adjust the brightness, sharpness, color,
tint, and contrast.
1. Press the
Menu button on the projector or remote control, select
the
Image menu, and press Enter. You see an Image menu screen
similar to the one below:
2. Use the pointer buttons to highlight the desired option, then
adjust it as needed:
■ Color Mode
Lets you quickly adjust the color and brightness for various
uses. You can save a different setting for each source. See
page 38 for details on each setting.
You can also change the color mode by pressing the
Color
Mode
button on the remote control.
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas.
note
When you select Reset All in
the Reset menu, it does not
reset the Input Signal, User’s
Logo, Lamp Hours,
Language, or User Button
settings. Additionally, no
items in the Network menu
are reset.
note
The Brightness setting
changes the opacity of the
projector’s LCD panels. You
can also use the Power
Consumption setting to
change the lamp’s brightness
(see page 108).