Product Information Guide
EPSON PowerLite 600p/800p/810p Projectors
8/01 EPSON PowerLite 600p/800p/810p Projectors - 3
1
The image is resized so that it displays using one of the projector’s
native formats (PowerLite 600p only).
2
The image is resized so that it displays using one of the projector’s
native formats.
3
Not supported on the PowerLite 600p
Computer Video Port Pin Assignments
The Computer 2/Component Video port is a female video
RGB, 15-pin micro-D-style connector. Here are the pin
assignments:
ELP Link Lite
If you want to be able to control the projector’s settings from a
computer, you can install the ELP Link Lite program. You can
download this program, plus its User’s Guide, from EPSON’s
web site at support.epson.com. You’ll also need a serial or
USB cable to connect the projector to the computer.
Positioning the Projector
Follow these guidelines to get the best results when projecting:
❏ Place the projector on a sturdy, level surface, between
2.85 and 41 feet from the screen.
❏ Make sure there is plenty of space for ventilation around and
under the projector.
❏ Make sure the projector is within 10 feet of a grounded
electrical outlet or extension cord and within 5 feet of the
image source.
❏ Face the projector squarely toward the screen.
Note: It’s easier to position the projector when the screen is
directly in front of the room. However, if you need to place it off-
center, you can use the keystone correction feature to maintain a
square image.
If you place the projector below the level of the screen, you’ll
have to tilt it up by extending the foot as shown. Tilting the
projector upward causes the image to lose its square shape, but
you can correct the distortion by pressing the
Keystone
button as described on page 6.
If you place the projector level with the bottom of the screen,
the image will be square and you won’t have to adjust it. If
you place the projector higher than the bottom of the screen,
the image will still be square, but you won’t be able to fill the
whole screen with the image.
NTSC 60
2
NTSC4.43 60
2
PAL 50
2
M-PAL 60
2
N-PAL 50
2
PAL60 60
2
SECAM 50
2
Pin #
Computer 2/Component
Video port (analog)
1 Red video
2 Green video
3 Blue video
4GND
5GND
6 Red video GND
7 Green video GND
8 Blue video GND
9 Reserved
10 Synchronous GND
11 GND
12 SDA
13 Horizontal sync/composite sync
14 Vertical sync
15 SCL
Mode
Refresh
rate (Hz) Resolution
DVI
support
ideal
height