Product Information Guide

ManualsBrandsEpson ManualsProjectorsEpson PowerLite 800p Multimedia Projector

EPSON PowerLite 600p/800p/810p Projectors

8/01 EPSON PowerLite 600p/800p/810p Projectors - 1

Projector Specifications

General

Type of display Poly-silicon Thin Film Transistor(TFT),

active matrix

Size of LCD panels Diagonal: 0.9 inches (22.9 mm)

Lens F=1.74 to 2.06, f=28.3 to 37.98 mm

Resolution

(native format) 1024

768 pixels (800p and 810p)

800

600 (600p)

Color reproduction 24 bit, 16.7 million colors

Brightness 2000 lumens (ANSI) (810p)

1500 lumens (ANSI) (800p)

1700 lumens (ANSI) (600p)

Contrast ratio 400 : 1

Image size 30 to 300 inches

Projection distance 2.85 to 40.7 feet (0.87 to 12.4 meters)

Projection methods Front, rear, upside-down (ceiling mount)

Internal speaker

system 5 W monaural

Optical aspect ratio 4 : 3 (horizontal : vertical)

Zoom ratio 1 : 135

Noise level 38 dB

Keystone

correction angle Vertical: ± 30° maximum

Horizontal: ± 10° maximum

Projection Lamp

Type UHE (Ultra High Efficiency)

Power

consumption 200 W

Lamp life About 1500 hours

Part number ELPLP15

Remote Control

Range 32.8 feet (10 meters)

Batteries Alkaline AA (2)

Mouse Compatibility

Supports PS/2 and USB

Remote IR Receiver

Supports EPSON Remote IR Receiver (typically used for rear

screen projection)

foot release

button

contro

pane

zoom ring

focus ring

remote control

receiver

Kensington lock

port

lamp cover latch

A/C power inlet

remote control receiver

status lights

handle

speaker

back

adjustable

foot

Computer1 (DVI)

optional

remote

receiver

S-Video

Serial

Computer2/

Component

Video

Audio Out

Mouse

Audio1

Monitor

Out

USB in

USB out

Composite

Video

Audio2

Summary of content (12 pages)

PAGE 1
EPSON PowerLite 600p/800p/810p Projectors control panel Projector Specifications zoom ring General Type of display focus ring Size of LCD panels Diagonal: 0.9 inches (22.9 mm) foot release button Lens F=1.74 to 2.06, f=28.3 to 37.98 mm Resolution (native format) Kensington lock port Poly-silicon Thin Film Transistor(TFT), active matrix remote control receiver 1024 × 768 pixels (800p and 810p) 800 × 600 (600p) Color reproduction 24 bit, 16.
PAGE 2
EPSON PowerLite 600p/800p/810p Projectors Dimensions . Resolution DVI support 57 640 × 400 supported 70 640 × 350 supported 60 640 × 480 supported VESA72 72 640 × 480 supported VESA75 75 640 × 480 supported VESA85 85 640 × 480 supported VGA120 120 640 × 480 SVGA56 56 800 × 600 supported SVGA60 60 800 × 600 supported SVGA72 72 800 × 600 supported SVGA75 75 800 × 600 supported SVGA85 85 800 × 600 supported SVGA120 120 800 × 600 Height 4.
PAGE 3
EPSON PowerLite 600p/800p/810p Projectors Refresh rate (Hz) Mode Resolution NTSC 60 2 NTSC4.43 60 2 PAL 50 2 M-PAL 60 2 N-PAL 50 2 PAL60 60 2 SECAM 50 2 DVI support 1 The image is resized so that it displays using one of the projector’s native formats (PowerLite 600p only). 2 The image is resized so that it displays using one of the projector’s native formats.
PAGE 4
EPSON PowerLite 600p/800p/810p Projectors Image Size and Projection Distance The projector can be installed for four different viewing setups: front projection, ceiling mounting, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown: Use the tables below to estimate how far to place the projector from the screen. Since the size of the image can be changed by rotating the zoom ring, a range of distance is given for each screen size.
PAGE 5
EPSON PowerLite 600p/800p/810p Projectors What To Do If You See a Blank Screen If the Arrange option isn’t available, you may need to select one of the Simulscan resolution settings: If you see a blank screen or a blue screen with the message No Signal after turning on your computer or video source, do one of the following: 1. Click the Monitor icon. Click here ❏ Make sure the cables are connected correctly, as described in the User’s Guide.
PAGE 6
EPSON PowerLite 600p/800p/810p Projectors Adjusting the Image Shape Projector Status Lights If the projected image isn’t square or has a “keystone” shape, do one or more of the following: The lights on top of the projector indicate the projector’s operating status. ❏ If your image looks like or , you’ve placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely.
PAGE 7
EPSON PowerLite 600p/800p/810p Projectors Light Status Description and action Button Function Flashing orange The projector is too hot. Make sure the temperature surrounding the projector does not exceed 95 °F and there is plenty of space around and under the projector for ventilation. Clean the air filter if necessary. Sync + Sync – Red The projector is overheating, which turns off the lamp automatically. Let it cool for a few minutes, then turn it back on.
PAGE 8
EPSON PowerLite 600p/800p/810p Projectors The remote control buttons are shown in the following illustrations. This table summarizes the functions on the remote control. signal output Freeze Special effects buttons (1-3) Menu Comp1 Video Power Starts or stops the projector. R/C on/off Turns the remote control on or off. Freeze Previous slide Next slide Keeps the current computer or video image on the screen.
PAGE 9
EPSON PowerLite 600p/800p/810p Projectors Button Function Preset Saves and recalls up to five different session settings (resolution, tracking, sync signal, and position). To save the current session settings, press the Preset button and it will be assigned the next available number, 1 through 5. To recall a setting, press the Preset button a second time and move to the desired session number. To overwrite a saved setting, move to the setting you want to replace and press Enter.
PAGE 10
EPSON PowerLite 600p/800p/810p Projectors 3. Use a screwdriver to slide the latch and pop open the lamp cover. Then lift it up and remove it. 4. If you need to replace the filter, make sure the projector is on its side as shown (not turned upside down) to prevent dust from falling inside. Then press the arrow tab to remove the filter. arrow tab 4. Use a screwdriver to loosen the two silver screws holding the lamp in place. (You can’t remove these screws.) 5.
PAGE 11
EPSON PowerLite 600p/800p/810p Projectors Resetting the Lamp Timer Optional Accessories After you install a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps: 1. Press the Menu button on the control panel or the remote control. You see the main menu. 2. Use the Sync– button (control panel) or the (remote control) to highlight About. button You see the lamp usage hours and other settings. 3. Press to select Reset Lamp Timer.
PAGE 12
EPSON PowerLite 600p/800p/810p Projectors 12 - EPSON PowerLite 600p/800p/810p Projectors 8/01