Product Information Guide

ManualsBrandsEpson ManualsProjectorsEpson PowerLite 7850p Multimedia Projector

EPSON PowerLite 7850p Projector

8 - EPSON PowerLite 7850p Projector 6/03

Note: The image will be slightly shorter after adjusting. If it’s

important to maintain the correct aspect ratio, use the menu

system to perform keystone correction, as described below,

then adjust the Height setting as needed.

❏ Press the

Menu button on the remote control, select the

Setting menu, and press Enter. From the Setting menu,

select

H/V-Keystone in the Keystone menu and press

Enter. Select V-Keystone (for vertical keystone distortion)

H-Keystone (for horizontal keystone distortion) and

press

Enter. Use the pointer button on the remote

control to adjust the keystone setting as needed.

Using Quick Corner

Use Quick Corner to correct the image shape when it’s

uneven on all sides.

1. Press the

Menu button on the remote control (or on the

projector’s control panel).

2. Select the

Setting menu and press Enter.

3. From the Setting menu, select

Keystone and press Enter.

4. Select

Quick Corner and press Enter.

You see this screen:

5. Press the

Enter button to

select the corner you want to

adjust.

6. Use the pointer button on

the remote control (or the

arrow buttons on the

projector) to adjust the shape.

7. Repeat steps 5 and 6 as needed

to adjust any remaining

corners.

8. When done, press the

ESC button on the remote control to

exit the menu system.

Quick Corner remains selected in the Keystone menu, the

Quick Corner screen appears whenever you press the

projector’s

Keystone buttons. You can then follow steps 5

through 8 above to correct the shape of your image, or press

ESC to exit Quick Corner.

Correcting Computer Images

If you’ve connected a

computer and the image

doesn’t look right or fit

properly on the screen, press

the

Auto button on the

remote control (or the

Auto/Enter button on the

projector’s control panel).

This automatically resets the projector’s tracking, sync,

resolution, and position settings.

Note: You must be projecting an image for this button to have

any effect. The

Auto button works only with computer images.

If vertical stripes appear in the projected image and the

Auto

button doesn’t correct the problem, hold down the

Shift

button on the projector’s control panel while pressing either

the

Tracking + or the Tracking – button.

If the image appears fuzzy or flickers and the

Auto button

doesn’t correct the problem, hold down the

Shift button while

pressing either the

Sync + or Sync – button.

Note: Also make sure you have selected the correct Computer or

BNC Input option in the Setting menu for your computer. See the

User’s Guide for more information.

[

]:Adjust

Adjust

[ ] :Move next

[ESC]

:Return (Press 1 second to

reset)

Auto

button